Talk:DIN connector

Page contents not supported in other languages.
From Wikipedia, the free encyclopedia

Date of publication[edit]

When was the DIN connector standard first published? — Preceding unsigned comment added by 177.132.17.182 (talk) 15:52, 26 June 2016 (UTC)[reply]

DIN 45522?[edit]

The text says "DIN 45322 (5-pin and 6-pin at 60°)", but the diagram of the 6-pin at 60° is labelled "DIN 45522: 6-pin, 60°, 240°". I strongly suspect that one of these is incorrect.

Searching online for "DIN 45522" mostly just turns up images that are on Wikipedia/Wikimedia (and images which are irrelevant, like pictures of people or random objects), while an image search for "DIN 45322" turns up many pictures of 6-pin DIN connectors that look just like the diagram labelled "DIN 45522". This leads me to believe that "45522" is a typo. Without access to the actual DIN spec I am unable to verify this, however. Laurence Gonsalves (talk) 18:12, 5 July 2016 (UTC)[reply]

Why "four channels"?[edit]

used... for interconnecting analog audio equipment, for example a stereo tape recorder to a stereo amplifier or preamplifier, using the five pins for the four signal connections plus ground. The cord used for this has a connector on each end, and the pins are connected pin for pin, that is, pin 1 to pin 1, 2 to 2, etc. Pins on male connectors are numbered (from right to left, viewed from outside of the connector, with the 5 pins upwards, and facing them): 1–4–2–5–3. Holes on female connectors are also numbered 1-4-2-5-3, but from left to right (facing the holes). A four-channel cord wired in this way is sometimes simply called a DIN cord, a DIN lead or a DIN cable.

Wouldn't a three-pin plug be sufficient for connecting stereo equipment (left signal, right signal, plus ground)? Why does the article speak of "four signal connections" and a "four-channel cord"? Wouldn't four signals indicate quadrophonic sound rather than stereo sound? Novel compound (talk) 17:04, 4 June 2017 (UTC)[reply]

Recorders (tape or otherwise) use separate analogue in (record) and out (playback) connections. So stereo in and stereo out requires four signal connections. An advantage of the DIN connector is that you get this in a single connector rather than the 4 phono connectors that are otherwise commonly used. (Note that only 1 of the 24 possible ways of connecting the phono connectors is correct.) GrahamN-UK (talk) 17:18, 30 November 2017 (UTC)[reply]

External links modified[edit]

Hello fellow Wikipedians,

I have just modified one external link on DIN connector. Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:

When you have finished reviewing my changes, you may follow the instructions on the template below to fix any issues with the URLs.

This message was posted before February 2018. After February 2018, "External links modified" talk page sections are no longer generated or monitored by InternetArchiveBot. No special action is required regarding these talk page notices, other than regular verification using the archive tool instructions below. Editors have permission to delete these "External links modified" talk page sections if they want to de-clutter talk pages, but see the RfC before doing mass systematic removals. This message is updated dynamically through the template {{source check}} (last update: 18 January 2022).

  • If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
  • If you found an error with any archives or the URLs themselves, you can fix them with this tool.

Cheers.—InternetArchiveBot (Report bug) 23:16, 2 September 2017 (UTC)[reply]

Retrieved from "https://en.wikipedia.org/w/index.php?title=Talk:DIN_connector&oldid=1200559460"