Talk:Gallon

El Salvador

I edited the list of countries section to include the following comment:

El Salvador announced in December 2020 that it will switch all units not presently metric to metric to be completed by June 2021. https://www.elsalvador.com/noticias/negocios/gasolina-se-vendera-en-litros-2021/786601/2020/

User DeFacto reverted the edit claiming; not relevant here yet - wait until we having RSes saying it has happened

Actually it is relevant seeing that the change is not an overnight change but is being done over a period of time to be completed by June 2021. The article states that workshops have been in place since October to educate the companies that are effected about the change.

Because the change has been announced, the article on gallons needs to be amended to show the change is presently in progress. I understand that those who are opposed to metrication may be upset that this is happening. The remnant uses of pre-metric or American units in many metric countries are continuing to be removed whether these opposers like it or not. Is hiding the fact and hoping countries like El Salvador change their mind is their goal?

I think it is the right time to add some form of statement that El Salvador is in the process of completing the change that has been done started over a century ago.

Ametrica (talk) 11:40, 18 December 2020 (UTC)

the US gallon is defined in EXACT metric terms

"do i have to do verything by myself?' — Preceding unsigned comment added by CorvetteZ51 (talk • contribs) 11:23, 23 June 2015 (UTC)

Untitled

"This definition is occasionally used in United Kingdom," So far as I'm concerned most people in the Uk above a certain age - let's say 45 - and many people younger still think in pints and gallons. There is a strong emotional attachment to Imperial measures. It's a lot more than occasional use - it's still engrained in the culture! Milk is still sold in pints 1 pint = 568ml) in all major supermarkets. I shall delete the "occasionally" unless I see convincing arguments no to. Sasha 23:41, 27 February 2007 (UTC)

Since you posted that 45 figure in 2007, in 2019 that figure is now raised to 57. As the population ages and dies out the emotional feel for archaic units fades and dies out with them. — Preceding unsigned comment added by Ametrica (talk • contribs) 13:29, 13 October 2019 (UTC)

Exchequer gallon (1091)

"Exchequer (Henry VII, 1091, with rim)" sounds to me like it is claiming that size to have been used in 1091 under Henry VII of England.

There's a problem with this, as the King of England in 1091 was William II. Henry VII was crowned in 1485. —Preceding unsigned comment added by 76.182.17.255 (talk) 17:54, 18 October 2008 (UTC)

History

"The metric definition of exactly 4.546 09 L was adopted shortly afterward."

I don't know that this has ever been officially adopted as the definition, anywhere. But it certainly is at least quasiofficial in at least the U.K. and Canada, a conventional conversion factor that has probably been at least declared to be good enough for legal purposes. Note that some lists of conversion factors such as The Units of Measurement Regulations 1995 of the U.K., do not claim to present any new definitions, but are rather merely compilations based on preexisting law. If you take them as official redefinitions, then the U.K. must have a weird definition of the hour, with a nautical mile defined as 1853 metres and a knot defined as 0.51477 metres per second (the actual legal definition of that nautical mile remains 6080 feet, notwithstanding the Units of Measurement Regulations 1995—note that the corresponding values for the international nautical mile are 1852 m and 0.51(4) m/s with the part in parentheses repeating, fours forever, no sevens to be found).

However, this statutory instrument may well be the one in which the 4.54609 litres became the quasi-official value for the United Kingdom. Before that, and going back into the 1970s at least, this value had been at least quasi-official in Canada, but the quasi-official value in the U.K. was different: 1 gal = 4.546092 litres. This distinction between a Canadian gallon and a U.K. gallon can still be found in many online lists of conversion factors, and in conversion programs which can be installed on computers.

Australia and New Zealand and other places may have similar lists of conversion factors in association with their metrication, but I don't know exact values, official status, or effective dates.

Gene Nygaard 05:50, 31 Dec 2004 (UTC)

NIST gives 4.54609 L/gal as the exact conversion factor for both the "UK and Canadian" imperial gallon(s) (Ref: Guide for the Use of the International System of Units (SI) - NIST Special Publication 811). The Canadian definition matches this and can be found at Weights and Measures Act, R.S. 1985, chapter W-6. Dunno about the UK. I've never seen the ...092 definition.

Urhixidur 15:32, 2004 Dec 31 (UTC)

The Imperial gallon was redefined in 1963 to the values that Benoit determined in 1898. This replaced the 1824 definition that had been in force. The gallon can be determined from the definition as M.(b-a).l/(b*(w-a)), where M is 10 lb, b, w, a is the densities of brass, water and air in the act, and l is the conversion from mL to c.cm, ie l cu cm = 1 mL.

Putting l=1.000028 gives 1 gallon = 4.5460918785. Since l is variously this or 1.000027, it is prudent to round the gallon accordingly to 4.656092 or 4.54609, the latter is adopted in 1985 in the UK, and somewhat earlier elsewhere. Wendy.krieger 10:21, 18 September 2007 (UTC)

---

'The corn or dry gallon was used in the United States until recently for grain and other dry commodities.' The use 'recently' isn't very accurate as it might have been recent only when the article was written. What I could find about is was:

The words “The dry gallon shall contain two hundred and eighty-two cubic inches” have been omitted since this apparently conflicts with sec. 2304 of the General Statutes, which provides that “The weights and measures received from the United States * * * shall be the State standards,” as the National Government has never recognized or authorized the dry gallon mentioned above. From the U. S. Dept. of Commerce, Bureau of Standards written in 1926. But that just says that it hasn't been officially recognized and not about it's usage. Naej (talk) 20:34, 11 June 2010 (UTC)

U.K. 1963 redefinition

The millilitre and the cubic centimetre were not the same in 1963. Were the densities in the 1963 redefinition specified in g/mL or in g/cm³? Gene Nygaard 11:47, 4 August 2005 (UTC)

---

Re the 1963 U.K. definition given here:

"In 1963, this definition was refined as the space occupied by 10 pounds of distilled water of density 0.998 859 g/mL weighed in air of density 0.001 217 g/mL against weights of density 8.136 g/mL."

Were these densities actually per millilitre, or were they per cubic centimetre? Note that the two were not the same thing in 1963. Gene Nygaard 05:55, 31 Dec 2004 (UTC)

For the gallon by this definition to yield both quoted values (4.54609 and 4.546092), the cm³ = 0.999 971 5 mL. This is a version of the Litre from 1900 to 1964. --Wendy.krieger (talk) 10:11, 18 January 2011 (UTC)

Ambiguous gallons in 'mpg'.

Many articles mention 'mpg'. This is ambiguous. What do people think is the best way to disambiguate this? For example we could say:

• 15 US mpg
  I think this is the 'least bad' solution.
• 15 mpg (US)
  I would prefer this solution because the 'US' is put near the gallon. Unfortunately, the context often requires more parentheses. For example 15 mpg (US) (16 L/100 km)
• 15 mi/USgal
  Hmm

Thoughts welcome. Please look at article examples to see how this would work in practice. Bobblewik  (talk) 12:55, 20 Jun 2005 (UTC)

• 15 mi/U.S. gal
• 15 mi/gal (imp)

If in running text, not just in tables, "miles per imperial gallon" or "miles per U.S. gallon" in first instance, and one of the abbreviated versions thereafter.

If any of them should happen to be used with boats or aircraft, ambiguous miles maybe should be disambiguated as well. I don't see that as much of a problem and can't think of any place where that happens now in Wikipedia, just throwing it in for completeness.

Symbols for units of measure should never be italicized, and your use of italics is unclosed. Gene Nygaard 13:34, 20 Jun 2005 (UTC)

I think we can assume US gallons for any contemporary context and only disambiguate the other cases. Actually it is just yet another reason not to use English measures at all. Christoph Päper 14:24, 20 Jun 2005 (UTC)

I've heard that many of the British still use miles per imperial gallon, though they buy their petrol by the litre. Their odometers are still in miles, anyway, so litres per hundred kilometres isn't any easier to calculate. It's even weirder in Canada, where I know many people who buy their gasoline by the litre and whose odometers are in kilometres still figure miles per imperial gallon. Gene Nygaard 05:16, 21 Jun 2005 (UTC)

How do they compute mpg when the purchase is in litres and the odometer is in kilometres? Do they really bother to do a complex computation or just guess? BTW, which mpg is used in Canada? — Preceding unsigned comment added by 68.109.207.69 (talk) 12:50, 18 December 2011 (UTC)

The imperial gallon is still used when 'mpg' is quoted in Britain. As far as I know it is the dominant unit that British people use when discussing fuel efficiency even though fuel is sold in litres, not gallons. Manufacturers still quote it, for example Ford UK says the Focus does 8.7 L/100 km (32.5 mpg). Furthermore, in-car fuel efficiency displays quote 'mpg' and mean the imperial gallon. Many British readers assume that 'mpg' refers to the imperial gallon because they are not aware of any other gallon. I suspect that the same would apply in other countries. Bobblewik  (talk) 10:40, 21 Jun 2005 (UTC)

Are there any actual article examples where mpg is used and there is an ambiguity over which mpg is being referenced? I think it's safe to assume that if the article is about a Cadillac then it's US mpg, and if it's about an Aston Martin, then imperial mpg. But a Volkswagen or a Honda would be less obvious. Still, this entire discussion seems hypothetical. Firejuggler86 (talk) 00:33, 5 April 2021 (UTC)

If mpg is used, ever, then it is ambiguous and should be converted to (eg) L/(100 km). Dondervogel 2 (talk) 08:55, 5 April 2021 (UTC)

Firejuggler86, the {{convert}} template disambiguates them by rendering them as either mpg_‑imp or mpg_‑US. -- DeFacto (talk). 09:45, 5 April 2021 (UTC)

Proposed WikiProject

Right now the content related to the various articles relating to measurement seems to be rather indifferently handled. This is not good, because at least 45 or so are of a great deal of importance to Wikipedia, and are even regarded as Vital articles. On that basis, I am proposing a new project at Wikipedia:WikiProject Council/Proposals#Measurement to work with these articles, and the others that relate to the concepts of measurement. Any and all input in the proposed project, including indications of willingness to contribute to its work, would be greatly appreciated. Thank you for your attention. John Carter 21:04, 2 May 2007 (UTC)

Cleanup

I'm trying to clean up this article. I don't like having bullet points in the lead section but it's difficult to avoid here. Can anyone suggest a better layout? Biscuittin (talk) 22:47, 26 February 2008 (UTC)

OK, done it. Biscuittin (talk) 09:06, 27 February 2008 (UTC)

Gallons Used as measurement for fuel in Burma

What may have been the case in 2012 and earlier changed shortly after that since references to fuel prices 2014 and later show litres only.

http://www.oilseedcrops.org/2014/04/05/petrol-prices-march-2014-in-yangon-myanmar/ https://www.mmtimes.com/news/fuel-prices-rise.html

Myanmar/Burma needs to be removed from the list of those countries using gallons. Myanmar is also making a slow switch to metric in other areas too.

Speed limits on roads are now 50 km/h urban and 80 km/h rural.

Ametrica (talk) 14:25, 19 January 2018 (UTC)

I'd like to see some references that support that Burma actually uses gallons as a measurement for fuel. The two links provided now are:

• 500 Are Detained in Burmese Capital "... the Government cut the ration of subsidized gasoline from six to four imperial gallons a week"
• Burma's Activists March against Fuel Price "The government, which holds a monopoly on fuel sales and subsidizes them, raised prices of fuel from 1,500 kyats (US $1.16) to 3,000 kyats ($2.33) per imperial gallon for diesel and to 2,500 kyats ($1.94) for gasoline."

These only indicate that gallons are used by the reporters that were writing about the events in Burma. The articles do not even touch the subject of what units are used in Burma. The second article even states the amounts in both US customary and SI units: "A canister of natural gas containing 65 liters (17 gallons) was raised from 500 kyats (39 US cents) to 2,500 kyats ($1.94)." The article also mentions US dollars. I hope you agree that these articles don't show that the USD is used in Burma as currency. Ulf Abrahamsson (talk) 18:15, 19 March 2008 (UTC)

It's unlikely, though that US writers would write of "imperial gallons", a unit not used in the US, unless the units used for the ration were in fact imperial gallons. Note that the second article says imperial gallons for the gasoline/diesel rations even as it converts the 65-liter figure to US gallons (65 liters is 14.3 imperial gallons, 17.2 US gallons) - and the prices (in local currency) as shown are very round numbers, unexpected if it were a conversion to a different unit size. --Random832 (contribs) 14:28, 7 July 2008 (UTC)

Aren't you assuming that US writers know that there is a difference between US and imperial gallons? How many Americans are aware there are different versions of the gallon? — Preceding unsigned comment added by 68.109.207.69 (talk) 12:53, 18 December 2011 (UTC)

Every schoolchild in the USA knows that the USA, Burma and Liberia are the only three countries listed in the CIA World Factbook as not having gone metric, and that the other two are on the imperial system. Of course both Liberia and Burma are in process of metrication, with Liberia pretty far along. However metrication is an expensive time-consuming process that can cost billions and take decades. Zyxwv99 (talk) 13:00, 25 September 2012 (UTC)

"Every schoolchild in the USA" is being misled then! Though indeed the three named countries are listed as such in the CIA factbook, it doesn't follow that Burma and Liberia are therefore "on the imperial system". Burma's non-metric system is largely indigenous (though imported units like imperial gallons may well be in there too). As for Liberia, considering the influence of settlers from the southern USA for the last 200 or so years, I'd have expected its measurement system to have become USC over the years, but "imperial" is often claimed despite (AFAIK) no significant influence by Britain or its erstwhile empire. Steve Hosgood (talk) 13:50, 26 September 2012 (UTC)

Good point about Liberia, even though every schoolchild in the USA is supposed to know about that as well, I guess my brain just didn't make the connection. (Too busy thinking about Burma and George Orwell.) On the other point, I agree that a journalist's choice of words is not a good indicator of anything unless a news article is specifically about the unit itself. What we really need is definitive information about Burma and Liberia. So far all I've been able to find out is that Burma is using acres in its published national statistics on agriculture. Zyxwv99 (talk) 17:11, 26 September 2012 (UTC)

I have seen a few pictures on Flikr etc. The pumps that they show are calibrated in gallons and look like 1950's vintage (or earlier). Martinvl (talk) 07:02, 27 September 2012 (UTC)

Do they really teach schoolchildren in the USA about the units of measurement used in a small African country on the opposite side of the Atlantic? Not so long ago National Geographic were complaining that the state of Geography education in U.S. schools was so bad that embarrassing numbers of U.S. schoolchildren didn't know the name of the capital city of the USA (and if they knew what it was called, most couldn't point to it on a map). I'd certainly not expect British schoolchildren to know what system of units Liberia used. Steve Hosgood (talk) 08:26, 5 October 2012 (UTC)

What schoolchildren in the USA know about geography is a mixed bag. They are probably more likely to know where Liberia is than that Paris is the capital of France. That's because Liberia has a special connection with the USA, and because Black History Month comes around once a year. (There's also a hint of implied racism in that question, since many European countries are small and on the other side of the Atlantic.) The CIA World Factbook is used along with the World Almanac and Book of Facts as a standard reference work for schoolchildren. They are often surprised when they stumble onto Appendix G, which says: "At this time, only three countries - Burma, Liberia, and the US - have not adopted the International System of Units (SI, or metric system)." Teachers also emphasize the fact, as many are rabid metric advocates and use Liberia and Burma to illustrate how dire the situation is. Zyxwv99 (talk) 12:51, 5 October 2012 (UTC)

"Martinvl's edit to the article starting "A German Government report on fuel prices..." seems to claim that "The German Government" believes Liberia to use U.S. gallons, which would fit with my conjecture (above) that if anything Liberia would use USC in general, not British Imperial. Steve Hosgood (talk) 08:26, 5 October 2012 (UTC)

Countries where this system is till in use

As far as I know, the only two countries that still use this form of measurement are the United States of America, and the United Kingdom, and they don't agree on what a gallon is. Is there any evidence supporting any other countries where this measurement is still officially used? (older generations in Canada talk of gallons, but in general no one really understands it when their elders talk crazy like that) --63.243.173.126 (talk) 10:58, 26 May 2008 (UTC)

Yeah, as a Canadian I can tell you that virtually nothing is sold by the gallon here anymore. If it's liquid, it's sold by the Liter or the Milliliter. In Canada, the official changeover from the Imperial system to the Metric system happened in the 1970s, under Prime Minister Trudeau. That was only about 30 years ago, so there's still plenty of people around who were only taught Imperial weights and measures and don't really understand Metric. You might still see fruits and vegetables sold by the pound, but it's more usual to see it sold by the Kilogram. Allthenamesarealreadytaken (talk) 17:52, 28 November 2010 (UTC)

Go to any car dealer in Canada, and he'll quote you fuel consumption in miles per gallon, and those gallons will be imperial gallons. The glossy brochures will have both litres per hundred kilometres and miles per imperial gallon, but even the youngest car buyers will be comparing the MPG numbers. But you're right, nothing is actually sold by the gallon in Canada anymore. Indefatigable (talk) 21:47, 29 November 2010 (UTC)

I may go to a car dealer once every ten years, but I drive on the road daily and purchase gas weekly. If other people's habits are similar they will have the same experience. Litres & kilometres are encountered frequently, miles and gallons very, very rarely. Those gallons in MPG are not measured nor are the distances in miles. Litres per 100 km result from direct measurements, MPG results only from a conversion. — Preceding unsigned comment added by Special:Contributions/ Ametrica (talk • contribs) (User talk: Ametrica (talk • contribs)) 16:58, 5 November 2011 (UTC)

The on-board computer in my car calculates the number of miles I have travelled based on wheel rotations, and calculates the number of gallons left in my tank from the average level. It then calculates both the instantaneous and the average fuel consumption in miles per gallon. If I chose, I could ask it to display the results in litres per 100 km, but it would still calculate the result by conversion, it would not measure either litres or kilometres. Dbfirs 21:43, 5 November 2011 (UTC)

Actually you don't know for sure whether the car "calculates" miles per gallon and converts that figure to litres per 100 km or the reverse. It is more likely the electronics and software are designed to do the actual measuring and calculating in more accurate metric units and when less accurate USC or imperial is selected it is a conversions you are seeing. I base this on the fact that all cars today, no matter where they come from are engineered, designed, manufactured and serviced using the metric system. — Preceding unsigned comment added by Special:Contributions/ Ametrica (talk • contribs) ([[User talk: Ametrica (talk • contribs)]) 18:07, 12 February 2012 (UTC)

Yes, I do know that neither miles nor kilometres are directly measured. Both are calculated. Similarly, neither gallons not litres are marked on the fuel tank. The software converts the level reading to whatever units are required by the display. I agree that manufacturers nearly always use metric units in the manufacturing process.

The devices that do the measuring either produce a designed number of pulses per metre (or other SI unit) or a voltage where the sensor is calibrated to produce a particular voltage per metre (or other SI unit). If the default units are chosen to be those of the design units in SI, the number is directly displayed. If non-SI units are chosen, the "number" is passed through a conversion routine before being displayed. Special:Contributions/ Ametrica (talk • contribs) ( Ametrica (talk • contribs)]) 01:39, 21 February 2012 (UTC)

No, the devices just produce a number of pulses. They are calibrated to either kilometres or miles. The number of pulses or the voltage needs to be converted to whichever unit is chosen for the display. Dbfirs 08:15, 21 February 2012 (UTC)

As I said the device is DESIGNED to produce a specific voltage or number of pulses per an SI unit and the SI unit is what is derived. A non-SI unit results from the SI unit passing through a software conversion routine. With a conversion routine you can easily and cheaply create any non-standard unit of questionable meaning and accuracy you want. Special:Contributions/ Ametrica (talk • contribs) (User talk: Ametrica (talk • contribs)) 14:32, 26 February 2012 (UTC)

Are you claiming that rotations of a tyre (which is sold in inch radius measurements) are counted, then converted into a metric equivalent, then converted back into miles for the odometer? This sounds like an irrational fear of imperial units. Are modern engineers really so out of touch with traditional units? I agree that software can perform any conversion you wish, into any units you choose. I suspect that real (rational) engineers just calibrate the measuring device in whatever units it is designed to display. Dbfirs 17:16, 26 February 2012 (UTC)

The tyres on my car are sold in metric as are everyone else who owns a modern car. http://www.sizes.com/home/automobile_tires.htm If you have a car with a mechanical display it will be designed to display the units the display is showing by selecting the right gearing. If it is modern digital, it is designed to work in SI units as the base and other units are converted to from the measured SI unit. I happen to have a rational dislike for that which serves no useful purpose other than to waste money and resources. Educated professionals such as engineers tend to look down on those Luddites that cling to the past. Real engineers would select the proper gearing to display the units intended on older style mechanical displays that can't be switched to other units but on digital devices where there is a choice of units the primary units are SI and the "whatever units" are software conversions. It only works to calibrate the electronics to a base set of SI units and use software to convert to the rest. Special:Contributions/ Ametrica (talk • contribs) ( Ametrica (talk • contribs)) 05:18, 4 March 2012 (UTC)

The article to which you link confirms my claim that tyres are sold based on an imperial measurement (inches) in their most basic dimension. I don't doubt that engineers now actually manufacture tyres to some metric equivalent. I hope that you are not claiming that "real engineers" use the car's gearing to measure distance travelled, because this is clearly false. Odometer readings are based on wheel revolutions, and modern odometers use a pulse counting system. This is digital, so is neither metric nor imperial, but is logically closer to imperial because each pulse corresponds to a distance measured in inches based on the radius of the wheel. Your dislike of imperial seems to go beyond the rational, but I do agree with you that modern engineers would be happier if they could abolish all imperial units. Dbfirs 08:30, 4 March 2012 (UTC)

All aspects of the automobile are concepted, designed, engineered and manufactured in metric units with no though of pre-metric units in mind. Tyre circumferences are neither round in millimetres or inches due to the non-roundness of pi. The fact is the engineers design the measuring devices to produce a result in metric units and any other units required by law in certain countries is done by a software conversion to those units from the metric units. It is done no other way no matter how much you want it to be. Special:Contributions/ Ametrica (talk • contribs) (User talk: Ametrica (talk • contribs)) 14:18, 11 March 2012 (UTC)

What do the people who don't have on board computers do?  Is your MPG USC or imperial?  — Preceding unsigned comment added by Special:Contributions/ Ametrica (talk • contribs) (User talk: Ametrica (talk • contribs)) 13:00, 18 December 2011 (UTC) 

They nearly all use miles per gallon, and it is the imperial gallon, of course, in the UK, even if the on-board computer is fitted in a car from an American manufacturer. Dbfirs 18:04, 16 January 2012 (UTC)

Do they actually bother to do a cumbersome calculation or just guess at a number out of thin air? — Preceding unsigned comment added by 68.105.199.216 (User talk: Ametrica (talk • contribs)) 18:09, 12 February 2012 (UTC)

I can speak only from my own experience. I convert the annoying litre readout at the pump to a more meaningful (to me) gallon figure, and then I divide the mileage reading by the number of gallons. All British cars have a "mileometer" not a "kilometre-ometer" as a fitted odometer, and the official annual "MOT test" records the distance travelled by the vehicle in miles. The calculation to convert litres to gallons is no more cumbersome that having to convert miles to kilometers. Many years ago I used a pocket calculator for the conversion, but I now use a spreadsheet, and yes, I do bother to do the simple calculation. I've noticed a significant drop in my car's miles per gallon rate during the recent sub-zero temperatures (or should I say "sub-32-degrees Fahrenheit?) Dbfirs 08:24, 13 February 2012 (UTC)

The litre readout is not what is annoying it is the continued use of obsolete units on the roads. I would think if those units were so wonderful British road engineers would use them too, but behind the scenes they use metric. Even many of the signs are placed at metric distances and the non-metric displayed on the signs if often wrong. Special:Contributions/ Ametrica (talk • contribs) (User talk: Ametrica (talk • contribs)) 01:39, 21 February 2012 (UTC)

I'm sorry you are annoyed by the use of yards and miles, but they cannot become obsolete whilst they are still in use. I agree with your point about the signs being inaccurate, but this is often because a suitable location may not be available at the exact distance. Dbfirs 08:21, 21 February 2012 (UTC)

They aren't actually in use, as they are just the results of someone's running a number through a calculator or taking a wild guess. The actual use is in metric, thus they are obsolete. The signs are designed to be placed at measured survey points in accurate rounded metric distances. As stated below, they intend for the signs to be at a precise 100 m (or other rounded metric unit) location. Special:Contributions/ Ametrica (talk • contribs) (User talk: Ametrica (talk • contribs)) 14:32, 26 February 2012 (UTC)

Actually the road manuals specify the signs showing "100 yards" shall be placed "100 metres" from the subject - see here, page 128. Martinvl (talk) 11:21, 21 February 2012 (UTC)

The regulations require such signs to be placed within a 10% accuracy, so as a metre is about 1.094 yards that is perfectly within tolerance. Would you expect them to be placed at exactly 91.44 metres?

A convenient loophole that allows them to place the signs by design at exactly 100 m and still claim what is on the sign is true. Even though it may say 100 YARDS, we know it is really 100 m. Special:Contributions/ Ametrica (talk • contribs) (talk) 14:32, 26 February 2012 (UTC)

68.105.199.216, I think British engineers have been working in metric for decades - not necessarily because they choose to, but because their employers stipulate that they have to. Luckily for the population though, they generally have no such pressures or diktats to comply with, and what we know is that where people have a free choice in the matter, they overwhelmingly choose imperial units over metric. -- de Facto (talk). 19:43, 21 February 2012 (UTC)

Engineers choose to use metric, it is part of their training to be efficient in it. Once they use it and see its perfection they develop a loathing for non-SI. It is that simple. The BBC ran an article recently (http://www.bbc.co.uk/news/magazine-16245391). All the professionals who commented were pro-SI. Metric haters tend to be kept out of the professions or freely stay away because they know they will be "forced to" use SI. Special:Contributions/ Ametrica (talk • contribs) (User talk: Ametrica (talk • contribs)) 14:32, 26 February 2012 (UTC)

Most of the signs where I live were placed long before engineers worked in metric units, and milestones are placed at almost exactly 1760 yard intervals. Telephones on motorways are at mile intervals with intermediate markers at intervals measured in yards. I expect that engineers who have only metric instruments have to do awkward conversions. There is nothing "imperfect" about yards and miles. They are an alternative system, not an inferior system. I'm happy with both imperial and metric systems, so I don't see why either has to exclude the other. Dbfirs 17:16, 26 February 2012 (UTC)

Almost exactly sounds like not exactly. Sounds to me like almost exactly 1760 yards is exactly 1600 m. I'm sure those yard/mile intervals are really some rounded metre value that you have convinced yourself is yards. Engineers who work only in SI units use only metric instruments and never are involved in conversions. Only those on the outside looking in do that. Pre-metric units have always had a history of large variances with the units. If they were perfect, educated professionals, scientists and the whole world would be using them, but due to their imperfection they are ignored except by those who hate the world for moving forward instead of clinging to the past. They aren't alternative and aren't even a system, just a mixed collection of units. The world only needs one true system, including out of date units only creates confusion, division and unnecessary costs to the national economy. Those who stick to one system progress while those fighting to have two or more are in decline.

BTW, the next time you are on a motorway look for the survey markers (http://en.wikipedia.org/wiki/Driver_location_signs?iframe) that are 100 m apart, marked in metric units and are used as emergency driver location signs. So when you call in an emergency from the road, such as with a mobile phone, you are giving metric information to the operator. Special:Contributions/ Ametrica (talk • contribs) (talk) 05:18, 4 March 2012 (UTC)

When I said "almost exactly", I meant "at a carefully measured distance of 1760 yards", definitely not 1600 metres (with actual placement not being possible to the nearest thou!) I'm puzzled by your concept of "perfection". As I said, I'm happy with both sets of units, and don't regard either system as "perfect", though I can understand engineers not wanting to convert between units, and thus placing modern markers at metric intervals, even though one interval has to be different to fit into the exact mile. What they are not capable of doing is changing the past, when markers were placed at mile intervals. Dbfirs 08:30, 4 March 2012 (UTC)

Much as I would like everybody to read Driver location signs (I am the main contributor), I feel that this thread is digressing. Please see p108 of this document for a list of countries that sell fuel by the gallon (UK/US specified in the document). Martinvl (talk) 08:48, 4 March 2012 (UTC)

Martin, Your PDF is dated 2009. A number of countries in Africa, the Caribbean and Arab Emirates have changed to litre sales since. Thus your information is invalid and obsolete. I'm sure if you can provide a similar document for 2012 you will see the change. Relying on dated material, as in this case, can produce serious errors. Special:Contributions/ Ametrica (talk • contribs) (User talk:6 Ametrica (talk • contribs)) 14:18, 11 March 2012 (UTC)

Thanks for the signs link, Martin, I'd found it from 68.105's link just before you posted it here. I must do some measuring on the local motorway (built in the '60s before the metric takeover amongst engineers) to see what units are now used. I agree we are way off topic with the miles discussion. I think 68.105 and I will just have to agree to differ. Dbfirs 09:16, 4 March 2012 (UTC)

When roads are redesigned, relocated, maintained to a degree that the whole sign is replaced, the new sign is placed at a rounded measured distance in metres, not yards. Even if there are some remnant signs somewhere out there still with real yard locations, they will eventually in due time be relocated when their time for replacement comes. The fact is the trend is to continue to place distance signs at metric marker points and this will not cease. BTW, there was no metric takeover amongst engineers. It was a decision made to make it more simple and precise when working with numbers. If imperial was really precise and user friendly, the engineers would have stuck with it. They didn't because working in imperial is both a royal PIA and error prone.

Don't forget all of British official Ordinance Survey Maps are on a metric grid. Between the maps and road work, you have a harmonised system. We can agree to disagree, but both of us can't be right and I'm not wrong on this issue. Special:Contributions/ Ametrica (talk • contribs) (User talk: Ametrica (talk • contribs)) 14:18, 11 March 2012 (UTC)

---

I think I should add a note that this article has been attacked and hijacked by a well known anti-imperial measure activist (yes, you read right). Any reference to UK miles or yards being 'all metric' is entirely false. Planning is in metric, the signs are accurate-enough imperial. The mile does not have a 'near metric' round figure (on the back of the "100 metres is 100 yards " nonsense). Please could the activist - who is Ohio based - not use British spellings in order to pretend a British POV? 205.177.176.242 (talk) 15:19, 25 October 2013 (UTC)

Nautical mile

It is peripheral to this page, but it may be worth noting that despite the provisions of the UK's Units of Measurement Regulations 1995, the International definition of a Nautical Mile is 1852m, and most UK legislation in which it is relevant includes this definition (such as in "The Merchant Shipping (Distress Signals and Prevention of Collisions) Regulations 1996, where it says "(3) In these Regulations... ... "mile" means a nautical mile of 1,852 metres") 82.152.253.130 (talk) 09:51, 2 June 2008 (UTC)

Common usage of gallon/litre etc

In the UK, it is no longer true to say that "Milk is sold in pints in all major supermarkets": it depends on the supermarket and on the dairy: Sainsbury's, for instance, sell their own label fresh milk in multiples of 568ml, but their own label UHT milk and most branded milk in litres. (see www.sainsburys.com)

Same situation in Tesco, Asda and Co-operative. Some supermarkets sell all milk in metric only quantities: Best One, Nisa, Aldi, Spar (to name just some). Steve Hosgood (talk) 10:59, 20 July 2011 (UTC)

And whilst there has been resistance to the change to metric units, it is dying out, and it is now rare to see the price of fuel "per gallon" quoted by anyone other than those who are trying to make a political point.

The idea that "Many British readers assume that 'mpg' refers to the imperial gallon because they are not aware of any other gallon." is interesting, but given that 95% of the world is not the USA, perhaps it would be more generic to say "Many American readers assume that 'mpg' refers to the US gallon because they are not aware of any other gallon." 82.152.253.130 (talk) 09:51, 2 June 2008 (UTC)

I disagree with the first part of what you said, Pints can legally be used as a volume of sale (There was an attempted EU resolution that would have out lawed this) but more importantly, Pub measures of Beer and Cider are always in Pints or divisions there of. As to the use of Gallons in fuel, Fuel is always sold in litres but Fuel economy is almost always in mpg, thats in both the motoring press and normally the Official literature of the car companies. I totally Agree with the second point though as what you sugest as the mistake is true and that it sugests that the US system of measures is more correct than the SI units that almost literally every other country uses.(Morcus (talk) 21:27, 30 July 2008 (UTC))

Not true pints are only legal for draught beer in pubs, but bottled beer is in litres. Consider this situation: you drink Guinness(*) down at your local pub. They don’t have Guinness on tap, so when you ask for a Guinness they take a 500 mL bottle out of the fridge (or a 500 mL can) and serve you with that. You’re used to it, and indeed plenty of the UK pub-going public are used to being served 500ml servings of beer if their pub doesn’t do their favourite on draught.

It is a legal requirement to use pints for milk, but only for milk delivered to your door. — Preceding unsigned comment added by 68.109.207.69 (talk) 17:04, 5 November 2011 (UTC)

I totally agree with the US-centric point two paragraphs back ... and similarly, I think it is ridiculous to use the word "unofficial" in the opening paragraphs regarding the Imperial gallon. This leads to ambiguity at best, confusion at worst. It should be clarified that the Imperial gallon WAS once the official unit in the UK and it is still in common use among people over a certain age (45/50). 621PWC (talk) 20:47, 14 December 2009 (UTC)

Except that "gallon" isn't in common usage amongst anyone in the UK except for fuel economy figures in MPG. Occasionally the tabloid press will have a headline saying "Petrol Now £X per Gallon, Shock Horror" (where X is usually an integer unless it's a *really* slow news day) but since no-one buys petrol in gallons and haven't since the 1980's, it's a meaningless rant. Steve Hosgood (talk) 10:59, 20 July 2011 (UTC)

Well I use "gallon" commonly, Steve, but then perhaps I'm not "anyone"? Dbfirs 21:48, 5 November 2011 (UTC)

It all depends on what is meant by use. How many products are sold in gallon units? How many products contain the word gallon on them? Do by the word "use" are you implying that someone translates the quantities declared on a package in order to say gallons and claim it is used? Uttering the word gallon is not use. Use implies actual measurement. How much actual measurement is done with gallons compared to parroting the word? — Preceding unsigned comment added by 68.105.199.216 (talk) 18:18, 12 February 2012 (UTC)

As I mentioned above, large tanks for fish, water and fuel are still advertised by their gallon sizes, but I agree that the gallon sizes have been translated into metric equivalents for most products to comply with labelling requirements. Dbfirs 08:07, 13 February 2012 (UTC)

Or more than likely the other way around. They engineered and designed and manufactured to a metric size and then the number is converted into gallons for the advertizement. Thus the gallon is not actually used just parroted. 68.105.199.216 (talk) 01:29, 21 February 2012 (UTC)

I think the former gallon sizes have probably been converted to metric measurements for modern manufacturing processes (we agree there), but the traditional gallon sizes are retained as accurately as possible in some cases. I also agree that these containers are probably in a shrinking minority. Dbfirs 16:50, 26 February 2012 (UTC)

WikiProject Food and drink Tagging

This article talk page was automatically added with {{WikiProject Food and drink}} banner as it falls under Category:Food or one of its subcategories. If you find this addition an error, Kindly undo the changes and update the inappropriate categories if needed. The bot was instructed to tagg these articles upon consenus from WikiProject Food and drink. You can find the related request for tagging here . Maximum and careful attention was done to avoid any wrongly tagging any categories , but mistakes may happen... If you have concerns , please inform on the project talk page -- TinucherianBot (talk) 04:21, 4 July 2008 (UTC)

weighing in air

"the volume of 10 pounds of distilled water weighed in air with brass weights with the barometer standing at 30 inches of mercury and at a temperature of 62 °F." How substantial is the difference between this weight and that of the same mass of water weighed in a vacuum (or between this amount and exactly 10 lb of water as weighed in a vacuum)? I assume it is a greater mass (and hence greater volume) than it would be in a vacuum, since water is less dense than brass. --Random832 (contribs) 00:23, 27 July 2008 (UTC) That is, the mass of water involved is more than 10lb, since it will take more water to balance the brass weights in air than it would in a vacuum. --Random832 (contribs) 00:24, 27 July 2008 (UTC)

If weighed against brass then (Asuming the same temperature) the same amount of Brass would balance the same amount of water. Either way the Mass can't change unless you change the amout of water which defeats the whole object of weighing it. the air should only effect the resistance against the movement of the balance and at the same temperature and gravity the ame amount of water will take up the same volume.(Morcus (talk) 21:32, 30 July 2008 (UTC))

It's to do with bouyancy. Because the volumes of the water and brass aren't the same, the two items displace different weights of air and thus receive different uplift. The effect would be more marked if weighed in water, less if weighed in helium, non-existent if weighed in a vacuum. --Old Moonraker (talk) 21:51, 30 July 2008 (UTC)

Right but I was wondering how significant it would be. --Random832 (contribs) 23:26, 12 August 2008 (UTC)

Very approximately 5 grams uplift on the gallon weighed in air, compared to weighed in a vacuum, when worked out on the back of an envelope here. --Old Moonraker (talk) 06:00, 13 August 2008 (UTC)

Using the data for the 4.54609 mL figure (ie the 1963 act), 10 lb of water in vacuum would be 4540.991 cc, rather than 4546.09 cc. This is because a gallon of water actually contains more than 10 lbs of water. It contains eg 70,075.134 grains of water. This will exactly match a weight of 70,000 grains of brass, when the 70,000 grains was set in vacuum. --Wendy.krieger (talk) 09:55, 16 January 2011 (UTC)

I'm confused how a US Gallon is not 8 pounds of water. 1 pint = 16 ounces = 1 pound, 2 pints in a quart, 4 quarts in a gallon. If I'm wrong, perhaps the article could explain? There's even an idiom about this -- "A pint's a pound, the world around" Tom (talk) 21:48, 27 April 2015 (UTC)

Definition of US gallon

According to the US NIST Special Publication 811 a US gallon equals 3,785412 liter (L). To my knowledge no change was made to this definition. --84.57.16.255 (talk) 16:49, 24 November 2008 (UTC)

I believe that this is true for most of the US, where a gallon is defined as having a volume of 231 cu in at a temperature of 60 degrees, but is not true for Hawaii which, since the 1970s, has legislated a gallon of 234 cu in to keep them from being shortchanged by the fact that they were, in fact, getting their gas at an average temperature of well over 60 degrees. —Preceding unsigned comment added by 99.241.164.70 (talk) 02:58, 21 October 2010 (UTC)

Is there a symbol for gallon?

I couldn't find any symbol for gallon (like m for meter, s for second, in the SI system, or the common use L for liter), nor in the lead section of the article, nor in the Definitions section. In the tables of the United States customary units article it seems to be gal, but I don't know if this is official nor if it applies the same to the dry and imperial gallons too.

Could any of the main editors consider including the symbol/s (if some exist) in the lead section of the article (I believe it belongs there, see Wikipedia:Lead section) and/or in the Definitions section?

Many thanks. --Pmronchi (talk) 16:50, 21 March 2010 (UTC)

Good point. I found "gal" in the 2012 edition of NIST Handbook 44, Appendix C (General Tables of Units of Measurement), page C-5 (Units of Liquid Volume). It's available as a PDF file from http://www.nist.gov/pml/wmd/h44-12.cfm. Zyxwv99 (talk) 14:56, 21 February 2012 (UTC)

Note that the symbol for gallon is "gal" (lower gase "g") and the symbol for the gal (a cgs unit of acceleration equal to 1 cm/s²) , short for Gallileo, is "Gal" (Upper case "g"). Martinvl (talk) 06:19, 27 February 2012 (UTC)

"Gal" is an abbreviation for gallon, not a symol as in the SI sense; as such, and applying the normal rules of English grammar, it can be capitalised. -- de Facto (talk). 07:21, 27 February 2012 (UTC)

In the Apothecary system, the symbol for gallon was C., the abbreviation was Cong., both short for congius. If you go back far enough, these symbols and abbreviations would have been used for gallons in general. It's just that doctors, lawyers, and apothecaries continued to use Latin a bit longer than other people. Zyxwv99 (talk) 14:30, 27 February 2012 (UTC)

The IEEE symbol for the gallon is 'gal'. I just edited the lede, including a reference to the standard that defines this symbol (IEEE Std 260.1-2004). Dondervogel 2 (talk) 23:42, 16 October 2017 (UTC)

Merge discussion

I propose that Gallons per minute and Million gallons per year be merged into this article. Lightmouse (talk) 11:51, 8 August 2010 (UTC)

Most Common

from the text "is equal to exactly 3.785411784 litres or about 0.133680555 cubic feet. This is the most common definition of a gallon in the United States."

I doubt it. I would say the most common definition of the gallon in the US goes along the lines of 2 cups in a pint, 2 pints in a quart, 4 quarts in a gallon. IMHO, no one in the US knows (or cares) how many liters are in a gallon. —Preceding unsigned comment added by 173.195.0.181 (talk) 04:30, 4 October 2010 (UTC)

The US gallon is defined as 231 cubic inches. This converts to 3.78511784 L exactly, but that is a derived figure, not a definition. The relation in cu ft is 231/1728 = 0.133680555 5/9 cu ft, is likewise derived from the definitions. --Wendy.krieger (talk) 09:59, 16 January 2011 (UTC)

Stupidity of Litres per 100 kilometres

Who was the dishonest snake-oil salesman who thought pushing this on the public was a great idea. So you want to know how far a litre of petrol takes you? Too bad, official figures make you work hard with mental division!

Kilometres per litre would have been SMART. I really am interested in finding out the history behind this epically moronic decision. The only thing I can think of is collusion between manufacturers to make it difficult for consumers to understand the fuel efficiency of their vehicles. —Preceding unsigned comment added by 89.16.173.123 (talk) 07:30, 13 October 2010 (UTC)

You might not know, but its very common in Europe, and most people find it hard to "understand" it the other way round like miles/gallon. This has nothing to do with stupidity. Anyone can get used to either way. Greetings from Germany ;) 89.0.23.81 (talk) 12:34, 29 April 2011 (UTC)

"Stupidity"? It all depends on what you want to know. If you want to know how many litres of fuel you need to do a given journey (where the distance is known in km), then litres per 100km is a far more useful value than its reciprocal. I use it all the time, despite being in the UK, where fuel is sold by litres but the roadsigns are still in miles (and car odometers measure miles). In the UK, whichever fuel consumption figure you use, you have to do some arithmetic to get results since *no-one* uses "miles per litre" or "litres per 100 miles" or whatever other hybrid system you can dream up. Steve Hosgood (talk) 10:49, 20 July 2011 (UTC)

Hatnote Jon Talbain

This leads to Jon Talbain, a character in a vampire fighting game whose alternative name seems to be "Garon". A national stereotype appears to have been applied as, within Japan, this evidently could be spelled "Gallon". I suggest that, this far removed from Jon himself, very few readers requiring the character would stumble upon this page. The hatnote in unnecessary. --Old Moonraker (talk) 06:11, 3 September 2011 (UTC)

OK, no dissent. Implementing. --Old Moonraker (talk) 06:01, 6 September 2011 (UTC)

What exactly is the legal status of the gallon in the UK?

The (old French) gallon introduced into Britain, no longer has legal status and it is no longer possible to buy liquid quantities in that unit. Some people may use them in conversation but may no longer be used in commercial transactions.— Preceding unsigned comment added by Felipito1.966 (talk • contribs) 2012-05-29 17:48:40

We have this sentence in the article:

On 1 January 2000, it ceased to be a legal unit of measure within the United Kingdom for economic, health, safety or administrative purposes.

I think this needs clarification, from secondary sources if necessary. I've added a {{clarify}} template to signify this. To make it clear what this means, we need to know under what circumstances it is illegal to use "gallon" and under what circumstances it is legal. Examples: is it illegal to buy petrol by the gallon? Is it illegal for newspapers to write about the price of fuel per gallon? Is it illegal for councils to ask how many gallons capacity ones cesspool is? Is it illegal to advertise fuel efficiency as miles per gallon? Is it illegal to buy, use or sell containers of integer gallons capacity? Is it illegal to talk about a cow's productivity in terms of gallons per whatever? Is it illegal to sell (or wear) a ten gallon hat in the UK? Can water authorities use gallons as a unit? It isn't clear at all. -- de Facto (talk). 17:17, 25 November 2011 (UTC)

The article quotes the law verbatim. It would be WP:OR to try and interpret the law. If you really want to know, speak to (and pay) a lawyer. You will be lucky to get a reliable secondary source - the legal bit about the offical fuel consumption figures contains text something like "Consumption shall be displayed in litres per 100 km and to the extent permitted by EU directive 80/181/RRC, in miles per gallon)" - is the government is sitting on the fence.Martinvl (talk) 18:13, 25 November 2011 (UTC)

As it doesn't make sense as it stands, and you say there isn't much chance of clarifying it, then perhaps it should be deleted - what's the point of it being there as it is? -- de Facto (talk). 18:48, 25 November 2011 (UTC)

That it is text from the EC doesn't help. They're all primary sources which need interpretaion. Leave the {{clarify}} template there for a while. If no-one else comes along who is able to help, then we'll have to consider removing the unfathomable information. -- de Facto (talk). 19:04, 25 November 2011 (UTC)

I have idetnified a paper that interprets the meaning of the directive as far as teh US Government is concerned. I have given its reference and removed the "citation needed" flag. Martinvl (talk) 20:35, 25 November 2011 (UTC)

That U.S. document though is from a meeting with the EU. It merely states the EU ideal, rather than the current reality. We need some (sourced) interpretation of what the law actually means to the UK population. Are gallons actually currently illegal in any circumstances - the current statement in the article suggests that they are? Are gallons legal in any circumstances? Is the law enforced? Has anyone ever been prosecuted for using them? -- de Facto (talk). 10:07, 26 November 2011 (UTC)

None of the suggested uses mentioned by DeFacto is illegal, but, in some cases, the EU requires litres to be also mentioned in printing of at least equal size (e.g. when selling milk in plastic containers). The water company would have to sell water by the litre, or at least print the rate per litre on the bill. The whole EU regulation dispute is a minefield because legal interpretation depends on whom you ask. It's best if we just report the (obscure) legislation, then report how it is currently interpreted. Dbfirs 08:29, 26 November 2011 (UTC)

We need to be clear about what is illegal and when, rather the vague allusion currently there that they are now completely illegal in all circumstances. -- de Facto (talk). 10:13, 26 November 2011 (UTC)

I have found some more references. Are you happy? Martinvl (talk) 18:56, 26 November 2011 (UTC)

Examples of use

A cursory web search turns up tens of thousands of hits on the word "gallon", just on the UK government website. Are the government flouting the law on a huge scale, or are we misrepresenting the meaning of any law? Here's a random sample of national government uses dated 2011:

• 26 Nov 2011 Department for Transport - "...the fuel tanks still contained approximately 7 gallons of fuel ..."
• 24 Nov 2011 Environment Agency - "A spill of around 5000 gallons of oil..."
• 13 Oct 2011 Food Standards Agency - "Rock Farm Dairy Whole Milk – pergals 3 gallons"
• 28 Jul 2011 Environment Agency - "...for polluting a river with thousands of gallons of slurry..."

-- de Facto (talk). 11:02, 26 November 2011 (UTC)

I checked DeFacto's search. Going onto Google, I used the search string "Gallon site:.gov.uk". The first few entries were:

• A four gallon milk churn in a museum
• Something from an archive website
• Had both gallons and litres as alternatives
• ditto
• The "Gallon of Water Trail" is the name
• Had both gallons and litres as alternatives
• Estate of the late Sylvia Gallon
• Had both gallons and litres as alternatives
• The "Gallon of Water Trail" is the name (again!)
• 10,000 gallon fuel tank planning application.

The only entry worthy of investigation is the last one - I don't know anything about it, bu tif it was described a "10,000 gallon tank" in the brochure before 1-Jan-2010, the it will not fall foul of the regulations. Apart form that entry, all the other entries either had gallons and litres or were of historic interest only. Martinvl (talk) 14:31, 26 November 2011 (UTC)

So 1 in 10 of your sample. That'd be more than 30,000 then in the full search result of 300,00 plus.

Did you look at the results I found, all from the 3,450 results that this search string gave me: "gallon 2011 site:.gov.uk"?

But, intersestingly, you are also applying a further filter to the results. So it's not: 'On 1 January 2000, it ceased to be a legal unit of measure within the United Kingdom for "for economic, public health, public safety or administrative purposes".', as it currently states in the article; it's more like "On 1 January 2000, it ceased to be a legal unit of measure for some limited uses within the United Kingdom for "for economic, public health, public safety or administrative purposes"." And why do you say in your comment above "...in the brochure before 1-Jan-2010, the it will not fall foul of the regulations", when the article states "On 1 January 2000, it ceased to be a legal unit of measure..."? We need to reword the statement for now then, until we find out more about it. -- de Facto (talk). 16:47, 26 November 2011 (UTC)

Two points - firstly the gallon was in the first tranche of units of measure that ceased to be legal, so I have corrected the article - the date is nopw 1 October 1995. Had you taken the time to read the references rather than just whinging, you woudl have spotted that. Secondly, the EU directive was amended again and as from 1 January 2010 which is why I used that date. I am not going to discuss it any further, you can do a little of yur own legwork.

The main point is that it cannot legally be used for trade - i.e used to calculate the price of a quantity of fluid - it can be used as a secondary indication. — Preceding unsigned comment added by 46.226.49.229 (talk) 11:28, 11 July 2017 (UTC)

Conversion to cubic inches

We seem to have some discrepancies in our conversions between litres and cubic inches. I'll read the article again before I make alterations, in case I've missed some historical variation, but the figures just don't tally as I currently read them. This is the paragraph that seems to have discrepancies: "This works out at approximately 4.5460903 L (277.4416 cu in). The metric definition of exactly 4.54609 cubic decimetres (also 4.54609 L after the litre was redefined in 1964, ≈ 277.419433 cu in) was adopted shortly afterwards in Canada; for several years, the conventional value of 4.546092 L was used in the United Kingdom, until the Canadian convention was adopted in 1985." Perhaps it is the redefinition that I'm getting confused over? Dbfirs 08:29, 26 November 2011 (UTC)

... (later) ... I've altered one figure because I can't see how it was calculated. If it was based on an old metric value, please revert and add the explanation. Dbfirs 18:51, 28 November 2011 (UTC)

Revocation of 28 November 2011

I have revoked DeFacto's changes tp this artcile because:

1. He replaced the word "legal" with the word "primary". The word "legal" appears in the phrase of Article 1 of the EU directive.
2. He reworded the implications of the EU directive. The EU directive affected many aspects of life - LACROS only commented on those that affect them (trade), hence the wording "amongst other things". Removing that wording changes the meaning of the sentence. Health issues, for example, although mentioned in the dircetive, fall outside LACROS' remit, so LACROS will not comment on them.

Martinvl (talk) 13:01, 28 November 2011 (UTC)

The word "legal" is anbiguous in the phrase "the gallon ceased to be a legal unit of measure within the United Kingdom", so needs clarifying. As we have seen in discussions above above, gallon is a legal unit of measure - i.e. its use is not illegal in most contexts. For this reason the phrase needs clarifying. So far, all that we've got RS for, is that the gallon cannot be used as the primary measure for trading, although it is perfectly legal, apparently, as a secondary (supplementary) unit. If there are other meanings please provide RS for them too. -- de Facto (talk). 13:28, 28 November 2011 (UTC)

No one said that there are no RS to explain the term further. You are welcome to look for them yourself. Martinvl (talk) 16:25, 28 November 2011 (UTC)

The statement therefore remains ambiguous, so I've added the {{ambiguous}} template to it. When we've clarified in what way the gallon is no longer legal we can consider removing the template - but surely not until then. -- de Facto (talk). 16:48, 28 November 2011 (UTC)

The statement is certainly ambiguous, and I don't think an outdated interpretation by an American website belongs here. The legislation specifically modified previous legislation (hence the "legal") where quantities had been specified in Imperial units. It also said, in the explanation, that its intention was the "phasing out of the use, for economic, public health, public safety or administrative purposes, of imperial units of measurement", but paragraph 5.—(1) stated "Nothing in these Regulations shall apply in relation to any supplementary indication". The gallon is not only still legal, but is still used (optionally) as a supplementary unit in the UK, though the volume in gallons can be printed no larger than the equivalent metric unit. These websites might be useful: UK metric association, amendment (subsequently extended indefinitely beyond 2009), 2009 amendment for volumes Dbfirs 19:20, 28 November 2011 (UTC)

A few points from Dbfir's comments:

• The EU directive appears to have extended the applicablity of the EU directive to all matters covered by the "internal market", but the UK government has not passed any legislation to cover that, nor am I aware of any court ruling to clarify what was meant.
• I think that Dbfirs really meant "For purposes of ...., the gallon is legal only as a supplementary unit ...". On the other hand, if we describe the October 1995 situation we will not be indulging in any WP:OR which is why I have introduced the words "amongst others".

Martinvl (talk) 21:01, 28 November 2011 (UTC)

The correct place to discuss the EU directive is at Metrication in the United Kingdom, not here. In my view all the double quotes, caveats etc should be removed and relaced by a Wikilink to Metrication in the United Kingdom. If we don't do this, we will have pseudo-copies of the same discussion in every artcile connectged with a unit of measure. In my view, that is a very silly hting to do. Moreover, if everything is centralised, then (hopefully) the full story will emerge, and if sublte changes emerge, they need only be added in one place. Martinvl (talk) 20:53, 28 November 2011 (UTC)

EU directives do not constitute British law, of course. There have been numerous British regulations since 1995, and all of them can be challenged by any British MP. I agree that the whole argument would be better moved to the general article. Dbfirs 22:49, 28 November 2011 (UTC)

On the contrary - under the European Communities Act 1972, EU directives are part of UK law, or more corerctly, the UK courts are obliged to honour them. Martinvl (talk) 08:10, 29 November 2011 (UTC)

That's not the same as law. The directives are actually implemented in UK regulations which have the effect of law unless and until they are challenged by the British parliament. Dbfirs 08:43, 29 November 2011 (UTC)

Dbfirs, yes, I agree that the U.S. meeting report adds nothing. We need to clarify the prose in this article to give a true picture of the status of the gallon. To say that it has "ceased to be a legal unit of measure" is grossly misleading without adding the actual meaning and context. It could leave the impression that it is somehow a criminal act to use or refer to gallons in the UK - which is, of course, nonsense. -- de Facto (talk). 12:52, 29 November 2011 (UTC)

I don't know where you picked that up from. Paragraph 3 of The European Communites Act (1972) as amended makes no such provision. If you read Directive (European Union) you can see a bit more about EU directives. If the directive can be implemented without intervention by the UK Government, then, by virtue of the 1972 Act, itis automatically part of UK law. If it requires UK Governemnt intervention, the the UK government can required to make good any damages caused by its neglect (See Francovich v Italy).

Anyway, this is well outside the scope of the current article. I believe it sufficient in this case to merely quote the basics of the EU directive and to leave discussion in the artcile Metrication in teh United Kingdom.

I think that DeFacto is confused about what constitutes a "criminal acts". There are many branches of law - criminal law, family law, contract law, law of tort, commercial law, administrative law just to mention a few - the only common thing concerning all of these is that the courts are competant to pass judgement should they be asked to do so and contravenign a legal requirement only constitutes a "criminal act" if there is a penalty payable to the state fo rdoing so. I suggest that you read the article law for a fuller understanding of the subject. Martinvl (talk) 13:10, 29 November 2011 (UTC)

Martinvl,

1. You don't know where I picked up what from?
2. The phrase that needs clarifying (or deleting) is: "the gallon ceased to be a legal unit of measure within the United Kingdom". that most certainly is within the scope of this article.
3. This isn't about my understanding of how the law works, and no, I'm not confused about what constitutes a criminal act. What this is about is the poor and ambiguous phrasing in the article that may lead readers of this article to be left with the wrong impression as to the legal status of the gallon. That's why I've raised this issue here.

-- de Facto (talk). 13:28, 29 November 2011 (UTC)

1. You don't know where I picked up what from? - I was unclear here - I was refering to Dbfir's comments about Parliament.
2. That phrase "the gallon ceased to be a legal unit of measure within the United Kingdom" must absolutely remain in place. As long as it is properly referenced, readers who need to know that about these things can seek proper legal advice.
3. If you are concerned that readers might get the wrong idea, then we need to be clear that the one aspect of life that we cited is but one of many. If they have any concerns they should seek legal advice, not rely on Wikipedia. It woudl be wrong of us not to draw to attention that there were changes (some specified, others unspecified) regardign the use of the gallon on 1 October 1995.

Martinvl (talk) 14:44, 29 November 2011 (UTC)

I'll stick to 2 & 3 then. If we can clarify the phrase, then it can stay. Our job is to provide clear secondary source interpretation, not to obfuscate the issue with verbatim and unclarified quotes from legislation primary sources. -- de Facto (talk). 15:06, 29 November 2011 (UTC)

... ("just to explain what I picked up"). I got the impression from British MPs and from the British Government website that only the British parliament can make law that affects British people. I agree that this principle has been muddied slightly, but it seems to be mainly confirmed in the Wikipedia articles I found following Martin's links.

e.g. "Directives are usually incapable of being horizontally directly effective due to the fact that they are only enforceable against the state."

"The horizontal direct effect of Directives is a contentious issue amongst law makers of the European Community, numerous Advocate Generals have supported the case for establishing horizontal direct effect, however it is still currently unable to confer such rights."

"Unlike Treaty provisions and regulations, directives cannot have horizontal effect (against another private individual or company), as this is adjudged contrary to the principles of equality (see Marshall v Southampton and South West Hampshire AHA (1986))."

The statement presently in our article gives a different impression (the way I read it), and there is certainly no law that prevents people in the UK from using the gallon for most purposes, just that metric units of volume must also be given in trade, and that metric units must be used in certain documents. Dbfirs 16:50, 29 November 2011 (UTC)

I've just summarised, in a nutshell, the status of the gallon in the article with reference to the appropriate UK law. How does that look? -- de Facto (talk). 17:07, 29 November 2011 (UTC)

I think that is a clearer way to express the complex situation. I'm guessing that the only gallon legislation that the regulation modified was that on the wholesale supply of milk and wholesale & retail fuel, but there could be other laws. It would be better if we could cite a recent reliable British source on the interpretation, but I haven't found one yet. This sitesummarises the situation, but is not quite what I was looking for. It does have the sentence: "EU Directives are not laws in themselves. Rather they are instructions to the Member States, requiring them to amend their domestic legislation to bring it into conformity with the provisions of the Directive." Dbfirs 17:56, 29 November 2011 (UTC)

Interesting, but that website is that of an anti-imperial units pressure group, and isn't a reliable source. -- de Facto (talk). 18:26, 29 November 2011 (UTC)

Yes, it's not impartial, I agree, but it was useful to use an anti-imperial site to make a pro-imperial point. I'm still looking for a good reference for a Wikipedia cite. Dbfirs 22:28, 29 November 2011 (UTC)

Supplementary vs Secondary

The EU directive and hence the UK legislation does not define the terms "primary" and "secondary" in respect of units of measure, but does mention "supplementary untis of measure". Introducing the terms "primary" and "secondary" into the article is therefore taking a novel position which is WP:OR. I have reinstated an earlier version as this does not include the words "primary" and "secondary". I have also included a reference to the use of the gallon as a supplementary unit of measure. Martinvl (talk) 12:51, 30 November 2011 (UTC)

The cited document "Guidance Note on the use of Metric Units of Measurement by the Public Sector" uses the terms "primary" and "secondary" when explaining how units from the two systems can be used side-by-side. Anyway, the use of those terms helps clarify the meaning of the legislation - we are allowed to paraphrase and explain details in our own words. That's just common sense, and certainly not OR. -- de Facto (talk). 13:13, 30 November 2011 (UTC)

As you rightly mentioned the DTI article uses the words "primary" and "secondary" in a special context - to differentiate between two units of measure that have already been associated with each other. However, the DTI document only uses the word "secondary" once in respect of units of measure, but uses the word "supplementary" a number of times. In normal English usage, a "secondary" item can stand alone - for example a "secondary school". Furthermore, the word "primary" is not used anywhere other than in the DTI document in the context of a "primary - secondary pair". For that reason we should use the words "primary" and "secondary" with great care because the legislation is quite clear - supplementry units must not be used in a stand-alone context. — Preceding unsigned comment added by Martinvl (talk • contribs) 14:38:13, 30 November 2011 (UTC)

I see the EU/UK content is being churned again. The idea of the article is to make it clear, not to keep obfuscating the issue. Neither the EU directives nor UK law has outlawed the use of gallon as a unit of measure per-se. All that the regulations have done is define metric units as the primary units which must be used in certain limited situations. None of which stop anyone from using gallons in much the same way as they always have done - the only proviso being that metric units must also be given (with no less than equal prominence) for certain activites to do with official government business and official documents and trading by volume. Why the apparent obsessive desire to prevent this being made very clear? -- de Facto (talk). 14:31, 1 December 2011 (UTC)

I have asked the OR noticeboard for advice. (Wikipedia:No original research/Noticeboard#Gallon). Martinvl (talk) 16:21, 1 December 2011 (UTC)

The references use the words "primary" and "supplementary". Are these not acceptable? Dbfirs 16:41, 1 December 2011 (UTC)

@Dbfirs: One reference uses the words "primary" and "secondary" once - in respect of "indicators", not "units". That same document uses the word "supplementary" half a dozen times. Martinvl (talk) 18:34, 1 December 2011 (UTC)

Martinvl, it's all semantics. Secondary or supplementary doesn't make too much difference to the meaning - does it? -- de Facto (talk). 18:59, 1 December 2011 (UTC)

It is not just a matter of semantics - it is a matter of clarity. Is a "derived unit" a "secondary unit"? Possibly or possibly not. Do you have any views? Martinvl (talk) 19:02, 1 December 2011 (UTC)

As you may realise, context is essential to be able to disambiguate many, many words in the English language. -- de Facto (talk). 19:25, 1 December 2011 (UTC)

Martinvl, I take it from that then that you are trying to get support to obfuscate the reality of the regulations then, rather than cooperate here with other editors and attempt to agree a clearer wording. Why? -- de Facto (talk). 16:49, 1 December 2011 (UTC)

If definitve wording exists, why complicate matters by using alternative wording that could be misconstrued? BTW, you still have not answered my question whether or not a "derived unit" is a "secondary unit"? Martinvl (talk) 20:41, 1 December 2011 (UTC)

Martinvl, what are you complaining about - the current text uses the word "supplementary" twice and "secondary" just once? And it only uses "secondary" as a reinforcement to "supplementary" in the phrase "...the gallon could still be used - but only as a supplementary or secondary unit.". Why reduce the clarity by eliminating one of the words?

And what has whether a "derived unit" is a "secondary unit" got to do with it? The BIPM certainly don't call them that in the SI brochure. -- de Facto (talk). 22:14, 1 December 2011 (UTC)

DeFacto - did you actuallteh DTI reference? If you did, you woudl have realised that I ignored the instance of the word "secondary" when it was applied to "secondary legislation" - the terms "primary legislation" and "secondary legislation" are well understood in the British legal system. I don't know where you looked, but the BIPM certianly uses the word "derived" in its brochure. Why don't you look up [[derived unit]s]? Using your logic, we could call a watt a "secondry unit" and kilograms, seconds and metres "primary units" even though the BIPM brochure uses the terms "derived units and "base units". If we did that, both the gallon and the watt could be deemed "secondary units" - clearly the EU are happy for the watt to be used but not the gallon. Martinvl (talk) 08:21, 2 December 2011 (UTC)

Martinvl, your response is bizarre. Did you actually read your own question to me? The one I was answering - this one: '...you still have not answered my question whether or not a "derived unit" is a "secondary unit"'.

Read it again, then read my reply - this one: "The BIPM certainly don't call them that in the SI brochure." "Them" being "derived units" and "that" being "secondary units" (if that much isn't blatantly obvious to you).

Now read your follow-up - this bit: "I don't know where you looked, but the BIPM certianly uses the word "derived" in its brochure". I know what a derived unit is and I know that they are described in the SI brochure - but that wasn't what you asked. You asked whether a "derived unit" is a "secondary unit". I replied that it (a "derived unit") isn't described as such (as a "secondary unit") in the SI brochure.

The rest of your reply, being based on the false and illogical premise, is therefore nonsense.

Are we clear now? -- de Facto (talk). 09:00, 2 December 2011 (UTC)

Usage in the United Kingdom

To the best of my knowledge, the gallon ceased to be a legal unit of measurement in the United Kingdom on the first of January, 2000 (http://www.legislation.gov.uk/uksi/1995/1804/contents/made). Could anyone please clarify as the article says the gallon is "used" in the United Kingdom. 173.180.210.51 (talk) 03:14, 3 February 2012 (UTC)

Well, not all of us obey European directives! In fact, the regulation to which you link does not ban the use of the gallon, but states that the "provision has effect for economic, public health, public safety or administrative purposes". In addition "Nothing in these Regulations shall apply in relation to any supplementary indication" (of which the gallon is one such). One has only to look at any car manufacturer's advertising in the UK to see that "miles per gallon" is still in widespread usage. Large containers are still sometimes advertised by gallon size, though the metric equivalent must now be stated. The article simply states a fact known to be true here, but I can provide a link to some advertising if that would help you to believe it. (I see that you expect me to believe that inches are still used in Canada, and I've no problem with that. ) Dbfirs 08:13, 3 February 2012 (UTC)

Although the gallon is no longer allowed as a primary unit for trading (specifically selling by volume), it can still be used as a secondary unit, and there is no regulation preventing the display of prices by the gallon. Also there is no regulation at all prevending the asking for a volume in gallons or preventing the use gallons in descriptions in the media or in literature. The regulation has a very narrow scope and the "official" position has had little impact on the day-to-day everyday use of the gallon in the UK. The UK still uses gallons. -- de Facto (talk). 09:04, 3 February 2012 (UTC)

DeFacto is only giving half the story - gallons may be used whern pricing liquids as a supplementary measure (ie alongside the price per litre and in a format that is not more prominent that the litre price). Even though DeFacto is a frequent contributor to motoring articles in Wikipedia, I have my doubts as to whether or not he actually drives. If he did, he would have noticed that petrol pumps are in litres and prices are advertised in litres (and have been since about 1984) and would have not made ridiculous statements like the one above. I have not seen anything priced by the gallon, even as a supplementary unit for many years. The only place where gallons are used in everyday life in the UK is in fuel consumption which is expressed in mpg alongside "L/100 km". Martinvl (talk) 10:01, 3 February 2012 (UTC)

Martinvl, I'm flattered that you have researched my editing history. It's a pity you don't read my contributions more carefully before commenting on them in such disparaging terms though. Where did you think that I suggested that petrol prices were displayed in gallons?

I pointed out that it is not illegal to use gallons in the UK, that's all - for the sake of accuracy and neutrality. Are you familiar with those latter two concepts? -- de Facto (talk). 10:21, 3 February 2012 (UTC)

DeFacto - please tell me exactly where gallons are used in the UK today (I know about the use of mpg) - when I buy petrol, it is priced by the litre, when I buy metered water (for household use), it is prioced by the cubic metre, when I buy "large" containers of oil, they are 5 litre containers, so where are gallons actually used? May I also draw your attention to WP:UNDUE. Martinvl (talk) 11:12, 3 February 2012 (UTC)

Martinvl, where? All over and by many, and probably most people when they are in need of a unit to measure or describe volumes or capacities of more than a few pints (a few 0.568261485 litres). It is the UK's traditional and cumstomary unit in such cases. I've never seen any evidence to suggest anything different, even since officialdom has relegated the gallon into second place behind the litre for the purposes of selling by volume or capacity. Even motorists, who don't get a choice in how fuel is dispensed. have a spare "gallon can" (even if it's actually a 5-litre plastic "can") and talk about how efficient their cars are in terms of mpg. Have you ever found any evidence, reliably sourced I mean, not from your personal experiences, that the majority of UK people have, at long last, discarded the gallon in favour of the litre? -- de Facto (talk). 13:55, 3 February 2012 (UTC)

Funny you mention pints of 0.568261485 mL. I wonder how many people who go to the pub and get a pint glass realise that those "pint" glasses are really 570 ml? http://www.ledcups.com/penthouse-570ml-pint-glass-only-6-78-each/ This is another example (as in the case of your 5 L can being referred to as a gallon) where the real world uses metric in design and manufacturing and will ignore all of those digits and make it simple. So wouldn't it be best to just refer to a pint as 570 mL and not waste your effort typing all those extra digits that are not real? 68.105.199.216 (talk) 14:38, 11 March 2012 (UTC)

Canada officially allows both the imperial and metric systems to be used. Here's the law mandating usage in Canada ( http://laws-lois.justice.gc.ca/eng/acts/W-6/page-14.html#h-17 ... note: gallon ). The law that forbade the use of gallons in the United Kingdom is a BRITISH law (and not a European directive). To the best of my knowledge, there is no gas station in the United Kingdom that sells fuel by the gallon (whereas there are in Canada -- in the prairie provinces and some Ontario towns). Many products in Canada still come by the gallon (paint for example: http://www.lowes.ca/HowTo/calculator_paint.aspx ... there is a metric option to comply with Canadian law, but I assure you that 99% of Canadians use what's familiar to them -- imperial). I'm not trying to say the gallon has lost currency among the British public as I know it is still used (albeit, INFORMALLY). To the best of my knowledge, there is no statute or officially sanctioned regulation in the United Kingdom that permits the gallon's continued use, whereas in Canada THERE IS (and therein lies the difference). Regarding my "expecting" you to believe inches are still used in Canada, all I can say is you've obviously never been to Canada. Home construction, engineering, cooking, etc, are dominated by inches (and other imperial units for that matter; the foot, the pound, even Fahrenheit--almost NEVER seen, except INFORMALLY, in the United Kingdom--etc). Believe what you want, but here's proof:

Showcasing "official" use of the inch (section 1.7 "Particulars of the Track" ... also make note of the "official" use of Fahrenheit -- completely nonexistent in British "officialdom"): http://www.tsb.gc.ca/eng/rapports-reports/rail/1996/r96c0135/r96c0135.asp http://www.weatheroffice.gc.ca/forecast/city_e.html?bc-74&unit=i (the Met Office doesn't offer an imperial option) — Preceding unsigned comment added by 173.180.210.51 (talk) 07:38, 11 February 2012 (UTC) http://www.foodnetwork.ca/ontv/hosts/anna-olson/recipe.html?dishID=2666&hostid=35047 http://www.foodnetwork.ca/recipes/Eggs/Dairy/recipe.html?dishid=2633 http://www.canadiantire.ca/AST/browse/6/Tools/HandTools/SpecialtyHammers/PRD~0574186P/Estwing+2.5+lb+Mallet.jsp?locale=en http://www.canadiantire.ca/AST/browse/8/KitchenBath/Bakeware/PizzaPans/PRD~0422635P/Lagostina+Pizza+Pan%2C+14-In.jsp?locale=en http://www.canadiantire.ca/AST/browse/3/HouseHome/BathroomDecor/ShowerCurtains/PRD~0631311P/Polyester+Shower+Curtain%2C+72+x+72-in.jsp?locale=en

Again, the usage of imperial units in Canada FULLY complies with Canadian law. Apart from road usage and pints, the United Kingdom mandates metric usage only (though I could be mistaken, and am therefore hoping someone can clear up the confusion). In Canada regulations for how food products are to be labeled (using the imperial and metric unit) are also mandated ( http://www.inspection.gc.ca/english/fssa/labeti/guide/ch2e.shtml#a2_6 ). When I was in the UK, my British relatives used metric measurements more than I did. 173.180.210.51 (talk) 23:56, 10 February 2012 (UTC)

173.180.210.51, in the UK something is allowed unless it is banned by some regulation - so as there is no regulation banning the use of the gallon (or any other imperial unit) then it is allowed, and certainly remains in widespread common use. However, for specific trading purposes and some of the activities of officialdom (law writing, etc.) there are regulations stipulating that a metric unit should be used as the primary unit. What that means in practical terms for those specified regulated activities is that the metric measure must be given and the imperial measure may also be given, but no no greater prominence than the metric measure. All of this is described in this article, with references, in the second paragraph of the "Worldwide usage of gallons" section. -- de Facto (talk). 09:56, 11 February 2012 (UTC)

Yes, the article accurately describes current usage. Fish tanks, hot and cold water tanks, fuel tanks (especially for motor bikes) are still sold primarily by gallon measurements, though most will have the metric equivalent also. I agree that Canada does not have EU directives to annoy it, but the UK does not "mandate metric usage only". Dbfirs 12:52, 11 February 2012 (UTC)

A European Union "directive" wouldn't fly in Canada. The EU would be swiftly told to stuff it. Lol. — Preceding unsigned comment added by 173.180.210.51 (talk) 20:53, 11 February 2012 (UTC)

Good for Canada! The EU tends to get a bit annoyed when the UK tells them that! Dbfirs 12:45, 12 February 2012 (UTC)

Well, Duh! That is because Canada is not part of the EU. I'm sure though that the UK Luddites are more annoyed by the EU then the reverse. The EU has more power than the UK and has the ability to punish the UK when it becomes too much of a whining annoyance. 68.105.199.216 (talk) 01:22, 6 April 2012 (UTC)

Oh yes! We enjoy whining at the EU, and I'm not sure which side annoys the other more. As one of the "UK Luddites", I can assure you that we get very annoyed by the EU, but, fortunately, they have no real power. They issue directives, but these are only documents, not laws. Only the British Parliament can make British laws. The EU's power to "punish" is ultimately just expulsion from the "club", and, since it is almost at the point of tearing itself apart over Greece, perhaps that would not be such a disaster! If ever the EU gained real power, I think I would emigrate to Canada! Please don't take my rant too seriously! Dbfirs 06:40, 6 April 2012 (UTC)

This discussion is going off-topic. Please read Directive (European Union) and also ignore the trash that is dished up by the editor of the Daily Mail. Martinvl (talk) 08:27, 6 April 2012 (UTC)

Yes, you're right. Sorry for sounding like the Daily Mail (I don't read it often!) I'd forgotten about the European Court of Justice, though Britain is not the only country that thinks it sometimes exceeds its intended powers. Ultimately, it has authority only by the agreement of the British parliament. Dbfirs 18:01, 6 April 2012 (UTC)

someone knows

The unit was exported from France to the U.K. so it is not British at all! — Preceding unsigned comment added by Felipito1.966 (talk • contribs) 2012-05-29 17:51:17

Where does the word gallon come from?according to this come from français but I'm not sure because of is a Roman measure or not. measure imperial (Roman empire) --EEIM (talk) 06:01, 4 February 2012 (UTC)

Section expanded a bit, but the "Roman measure" needs further research from somebody. --Old Moonraker (talk) 08:19, 4 February 2012 (UTC)

Spam Alert

I just reverted linkspam by user Oleh Svintsitskyy who appears to be a professional spammer. All of his edits are linkspam linking to the same site. In just the few minutes that it has taken to write this warning, he has posted more spam. Zyxwv99 (talk) 17:34, 11 March 2012 (UTC) That's Oleh_Svintsitskyy Zyxwv99 (talk) 13:39, 12 March 2012 (UTC)

"It has never been a Non-SI units mentioned in the SI"

Indeed it never has, but why is it necessary to note this in the article? The gallon originated in Normandy about a thousand years ago; there was no reason why the physicists in Paris who worked out the SI should incorporate the units of their predecessors from the dark ages, any more than they they considered the pinte, quiade or velte. At the risk of evoking a WP:BEANS response, we don't put those in either. It's completely unnecessary and incongruous to mention SI in the context as the two classes of unit are so widely separate.

I have removed it; several other editors have removed it, yet it keeps reappearing. Please accept the consensus on this, and don't bring it back.

--Old Moonraker (talk) 23:30, 2 August 2012 (UTC)

Yes, the statement certainly doesn't belong here, however it is phrased. There are a million things the gallon is not. The article is about what the gallon is. I wonder why User:Nezdek is so persistent and claims "consensus" when the majority is clearly opposed. Dbfirs 07:11, 3 August 2012 (UTC)

This appears top be a clumsy attemtp to draw a parallel with the litre which is "Non-SI units mentioned in the SI". The lede already implies that the gallon is not an SI unit when it draws to attention that the gallon has been replaced by metric units in the UK and in Canada. An additional statement is not neccessary. Martinvl (talk) 09:29, 3 August 2012 (UTC)

I agree with Old Moonraker, Dbfirs and Martinvl. Zyxwv99 (talk) 13:35, 3 August 2012 (UTC)

Liberia

I realize we've been discussing Liberia in the Burma section since the two countries seem to go together, but maybe we should separate them out. I have found a document ("Poverty Reduction Strategy") on the Republic of Liberia's Executive Mansion website that has some relevant information here (big slow-loading PDF file) Apparently they still use gallons, but also cubic meters (spelled the American way). "Monrovia’s water supply fell from 18 million gallons daily to just 1 million gallons." section 9.6, page 106 Zyxwv99 (talk) 13:45, 27 September 2012 (UTC)

History section needs work

The gallon originated as the base of systems for measuring wine, and beer in England. The sizes of gallon used in these two systems were different from each other: the first was based on the wine gallon (equal in size to the US gallon), and the second on either the ale gallon or the smaller imperial gallon.

The earliest available records indicate that there were three systems of capacity measures: "Let there be one measure for wine throughout our kingdom, and one measure for ale, and one measure for corn, namely the London quarter." The wine gallon in use in 1215 is unlikely to have been of 231 cubic inches, as that gallon has only been traced back as far as the 15th century. It might have been an older gallon of 224 cubic inches, but that is not definitively known. The imperial gallon was not part of the original system but a recent innovation.

By the end of the 18th century, three definitions of the gallon were in common use:[citation needed]

• The corn gallon, or Winchester gallon, of about 268.8 cubic inches (≈ 4.405 L),
• The wine gallon, or Queen Anne's gallon, which was 231 cubic inches[14] (≈ 3.79 L), and
• The ale gallon of 282 cubic inches (≈ 4.62 L).

The gallons listed here were the ones in use until the Weights and Measures Act of 1824 went into effect. Each came into use at a different time, but all were in use for quite some time before the 18th century. Therefore, "by the 18th century" makes no sense.

[paragraph on corn gallon OK as far as I can see]

The wine, fluid, or liquid gallon has been the standard US gallon since the early 19th century.

This gallon was actually used as far back as the beginning of the colonial period. In 1830 Congress asked the Treasury Dept. to take inventory of the weights and measures standards used at its customs-houses. In 1832 Treasury returned with a report that it was using the same units as in pre-revolutionary times, only in some cases with more up-to-date standards (as for example the 1815 yard standard made in London by Troughton, a world-class standard). The gallon was 231 cubic inches, the same as it had been when the Pilgrims landed at Plymouth Rock.

The wine gallon, which some sources relate to the volume occupied by eight medieval merchant pounds of wine...

There are several conflicting theories on the origin of this gallon. We should not just promote one in a parenthetical statement.

...was at one time defined as the volume of a cylinder six inches deep and seven inches in diameter, i.e. 6 in × (3 1⁄2 in)2 × π ≈ 230.907 06 cubic inches. It had been redefined during the reign of Queen Anne, in 1706, as 231 cubic inches exactly (3 in × 7 in × 11 in), which is the result of the earlier definition with π approximated to 22⁄7. Although the wine gallon had been used for centuries for import duty purposes there was no legal standard of it in the Exchequer and a smaller gallon (224 cu in) was actually in use, so this statute became necessary. It remains the US definition today.

This is confusing and not quite right. The definition of 231 cubic inches goes back to well before 1707 (see here and here). It was the 1706 Queen Anne legislation that supplied the 6 x 7 cylinder as a secondary definition. At the time, the value of pi was already known to many decimal places. The 22/7 figure was a metrological convention going back to the Middle Ages, and continued in use for the convenience of the manufacture of physical standards.

I'll try to fix some of these things (with reliable references) when I get the time. Zyxwv99 (talk) 15:09, 2 October 2012 (UTC)

It would also be nice to see some evidence that the gallon was actually the base unit, and in what period of history. Zyxwv99 (talk) 15:11, 2 October 2012 (UTC)

Hi Zyxwv99

I looked up "gallon" in the Oxford English Dictionary". (I have access to the on-line version). The Etymologyof the word "gallon" reads:

Old Northern French galun, galon, Central Old French jalon, etc. (= medieval Latin galōn-em), apparently cognate with French jale bowl. Compare the diminutive form Old French galet, jalet (masculine), medieval Latin galleta (feminine), a measure for wine, Old English gęllet bowl (? from Romance or popular Latin), Portuguese galheta mug; also Old French galaie, galeie, jalaie, etc., feminine a measure for liquids, grain, etc. The ultimate origin is unknown

Anybody doing a full history has their work cut out, so, to avoid WP:OR, it will be neccessary to find out what has already been written. BTW, the Scottish gallon was about three English gallons. Also, the OED cites the use of the word "gallon" from 1300 onwards. Martinvl (talk) 16:05, 2 October 2012 (UTC)

The imperial gallon was taken from the capacity of the urinal of I do not remember which British king, and his queen's urinal capacity was the gallon adopted by the U.S. -Externet97.40.64.171 (talk) 03:50, 29 June 2017 (UTC)

Is someone taking the ....? Dbfirs 07:41, 29 June 2017 (UTC)

Definition of U.S. gallon (revisited)

The article states that, For the purpose of alcoholic beverages, the US law defines it as 231 cubic inches at 60F. This is an obvious misconception as temperature has nothing to do with convertion between two native units of volume. The condition of 60 F is redundant. Tomzuk (talk) 21:49, 7 November 2012 (UTC)

I noticed that. The edit happened about 2 days ago. The new version is actually correct, but bothers me because it removes 231 cubic inches from the primary definition. It's correct because substances with high coefficient of thermal expansion such as gasoline and alcoholic beverages do in fact have standard reference temperatures. This is something like the FDA tablespoon, which is not quite the normal definition of a tablespoon. Zyxwv99 (talk) 01:03, 8 November 2012 (UTC)

I just reverted and made an additional edit.

Isn't the basis for primary definition based on the law? Since this is the US gallon, I find that something supported by the law is as long as its written like "the US law defines it as". I tagged the current source, because it does not support the claim gallon is defined as 231 cubic inches. Legally, in the USA, a gallon of liquor at 32F isn't 1.0000 gallon. It has to be correlated to what it would be at 60F. I believe something similar is in effect at gas pump too. The volume pumped has to be offset to correlate to equal volumetric gallon at a specific temperature. Cantaloupe2 (talk) 22:12, 8 November 2012 (UTC)

But what's the difference between a cubic inch at 60°F and 32°F (or 0°F, or 1000°F, or any other temperature)? It would make sense if gallon was defined as a volume occupied by a particular mass of a certain substance as it would expand or contract with temperature. But it is defined in terms of another unit of volume, which is a purely geometric quantity and has nothing to do with temperature or physical properties of anything. Inch, and then cubic inch, is the same whether we have 60°F or zero, or whatever. Tomzuk (talk) 22:59, 8 November 2012 (UTC)

It doesn't, but then including 231 cubic inches in addition to metric definition is redundant. What's the difference between expressing it as (231 cubic inches) or 3785.xxxx(cubic centimeter)? Doesn't "definition" here mean legal definition? So, in actual usage context, gallon doesn't necessarily occupy 3785cm^3, but "a gallon of vodka" has a greater volume than 3875cm^3 at 20C (68F), because its scaled to 3785cm^3 @ 60F. The only reason to include 231 ci is to support legal definition. Cantaloupe2 (talk) 23:30, 8 November 2012 (UTC)

Yes, a US gallon is defined as 231 c.u. whatever the temperature, but the regulations require that particular fluids are sold from dispensers calibrated at the reference temperature, in an attempt to ensure a consistent mass (assuming that density cannot vary). I'm not sure how best to clarify this in the article. Dbfirs 23:15, 8 November 2012 (UTC)

I just looked at the change to the definition of the gallon. What it says now is not correct. The 68 deg. F reference temperature is from an FTC regulation relating to product package labeling. That is a specialized definition of the gallon similar to the FDA's peculiar definition of a tablespoon. A better source for general purposes is NIST Handbook 44 - 2012 Appendix C "General Tables of Units of Measurement" page C-5, which makes it clear that the gallon is 231 c.u. The FTC regulation currently cited also defines the liter in terms of the same standard reference temperature. Zyxwv99 (talk) 03:00, 9 November 2012 (UTC)

Perhaps we could include both? The gallon is different here, so I'll leave it to editors on your side of the pond to put back the standard US definition. Dbfirs 07:35, 9 November 2012 (UTC)

OK, I understand the problem. Imagine that we measure 231 in³ of alcohol at the reference temperature (which is exactly one gallon). Then we heat it so that at a higher temperature it takes 231.231 in³ due to thermal expansion. Assuming there was no evaporation, how many gallons do we have now?

1) 1.001 gal because gallon refers to the amount of space occupied by sth. This is what I thought before, but you are arguing it's not correct.

2) Still exactly 1 gal because gallon refers to the amount of a substance. If this is true, gallon is not a unit of volume (the volume has increased!)

3) Some other number (what and why?)

4) It doesn't make sense to use gallons at temperatures other than the reference temperature. It would render the use of gallon totally impractical, so I don't think this is the case.

Tomzuk (talk) 10:16, 9 November 2012 (UTC)

Exactly the same applies to any volume measurement. A "cubic centimetre of pure gold" will vary in mass (and value) depending on the temperature at which the measurement was made. Volume is a convenient proxy measurement for amount of substance, but needs a reference temperature if an accurate proxy is required. Length (and hence volume) once had a reference temperature for the platinum-irridium bar (though is was the bar that needed the temperature, not the metre), but is now defined without reference to temperature. I would consider that your "1)" is correct. A "gallon" of fuel actually expands to more than a gallon in volume when you heat it, so you would get more fuel for your money in a cold winter if the pump measured an exact gallon all year, hence the calibration at a specified temperature. Dbfirs 16:59, 9 November 2012 (UTC)

... (later thought) We need to distinguish between an actual volume gallon and the "gallon amount" that a fuel pump is allowed to dispense at different temperatures. The regulations seem to require that in cold weather the pump is allowed to dispense an amount that is actually less than a gallon, whereas in a heat-wave it must, by law, dispense more than a gallon. Pumps that are not so regulated might be used only at night by price-conscious people, and some people might buy their fuel in very cold weather and store it for summer. (I'm not sure that the difference would be worth the effort!) Dbfirs 17:18, 9 November 2012 (UTC)

So the question is whether this adjustment is only a legal trick or it is incorporated into the scientific definition of gallon (which wouldn't be, in a strict sense, a measure of volume in that case). The former seems more probable to me, but I didn't see any reliable source. Tomzuk (talk) 00:18, 10 November 2012 (UTC)

Cantaloupe, this was your comment: "the citation is just "not there" therefore it is not verifiable and citation you provided don't support it and you're inserting unverifiable claim." I don't see why the ref from the FTC should explicitly state the phrase "legally defined" when the Federal Trade Commission is a federal bureaucracy that creates laws and policies on topics such as this; therefore it is "legally defined". If you think it's OR - it's not - because it's supported in the refs but not specifically stated word for word on the provided webpage of that one ref. I don't know why you are being narrow-minded on the content of the citation, but some things such as this do not have to be specifically mentioned in the references to be known facts. I don't care whether or not that phrase is removed since Martinvl synthesized that phrase himself, but I find your addition of tags everywhere such as the one you added, {{verification failed}}, are unnecessary and unconstructive. - M0rphzone (talk) 05:49, 10 November 2012 (UTC)

Apparently there's no consensus to "legal definition" right now. I'm the one who put in the FTC link, but Martinvl objected to it and removed it then replaced the reference with a conversion table. So, with current references legal definition is not established. NIST does not establish the legal definition of a unit. Cantaloupe2 (talk) 09:41, 10 November 2012 (UTC)

Edit: Your comment before you deleted it:

"I see you waltzing into topics and areas specifically and only because I'm editing as nonconstructive. You follow me everywhere into all sorts of topics ever since our encounter in iPhone 5, including topics you have no involvement in... Pay attention to whats going on in talk before you just stop in and revert."

That's strike 2 for incivility and personal attacks in your comments in addition to your previous remarks in the edit summaries. You assume I haven't read or understood the situation and refer to me as waltzing into comments that you participate in - I'm considering that a personal attack as it seems to me that you are deliberating attempting to make me mad. Going through your past edits and behavior with other editors, you are abusing the WP:BRD process and your pattern of edits is disruptive and hostile towards others, showing that you are here to fight with other editors/edit war instead of building an encyclopedia. For every single article you edit, you do something something disruptive or controversial including mass deletions without proper consensus as seen in discussions at Talk:Headlamp and on the article pages. If you want to take it to ANI for edit warring, disruptive editing, personal attacks, and incidents at this talk page, iPhone 5 talk page, Search engine optimization talk page, and various talk pages including other users involved in incidents you've incited, then keep it up. You've brought Corporate Minion to ANI for edit warring, but from the looks of it, you're going to be ending up there soon for edit warring, disruptive editing, and personal attacks against me and other users.

You have already been warned once for your behavior with Corporate Minion, and it looks like you are deliberately attempting to start another conflict/edit war with other users (ex: me and YuMaNuMa at Talk:iPhone 5). I have not been saying anything, assuming that you would change your edit behavior after the closing of the incident, but it looks like it is starting again as the editors here and on the other articles have witnessed. - M0rphzone (talk) 01:36, 11 November 2012 (UTC)

It is disruptive to the topic that User:M0rphzonebringing this matter to the article talk page is disruptive as it has nothing to do with article. Response will be added to talk. Cantaloupe2 (talk) 01:46, 11 November 2012 (UTC)

I have issued a 3RR warning to Cantaloupe2 in respect of his unneccessary and unwarranted "citation needed" additions. As far as this citation is concerned, theIntroduction section of the document concerned clarified the role of the document. Martinvl (talk) 10:34, 10 November 2012 (UTC)

adding tags do not constitute reversion. For example, this edit is not a reversion. Cantaloupe2 (talk) 11:08, 10 November 2012 (UTC)

The issue seems to be whether regulations have the force of law. I thought it was common knowledge that they do, as legislative bodies delegate, through law, authority to regulatory agencies. If someone doubts this, maybe we could look it up, not to put in the article, but just to resolve the dispute. Zyxwv99 (talk) 16:46, 10 November 2012 (UTC)

As Uniform Laws and Regulations in the areas of legal metrology and engine fuel quality (PDF). US Department of Commerce, National Institute of Standards and Technology. 2011. pp. 9–13. shows, the states all define weights and measures in law but vary as to whether corrections for temperature for fuel trading are defined in regulations or in laws. (I've added that reference to the article as it is also a useful source for the legal definition of the gallon.) Yes, regulations frequently have legal force and it is common knowledge that breaches of such are illegal. NebY (talk) 17:37, 10 November 2012 (UTC)

Changes of 20 May 2013

I have reverted and reworked the changes made earlier - Wikipedia is concerend with verifiability, not truth. We cannot just remove items from a list because they are no longer true, so I have reflected what the original report said and any changes since the publication of the report. In this way, anybody revisiting the citations will see that Wikipedia faithfully reproduced the citation. Of course, if a more up-to-date reliable citation can be found to replace the German Government citation, it will be substituted. Martinvl (talk) 06:44, 20 May 2013 (UTC)

This publication shows that selling gasoline in Puerto Rico has been the law since 1980:

http://app.estado.gobierno.pr/ReglamentosOnLine/Reglamentos/2516ING.pdf

You have 2011.

So, what becomes a valid means to remove the countries that switched to litres to have them removed from the list? How is it though that the german report of 2011 is valid? 68.105.199.216 (talk) 00:50, 21 May 2013 (UTC)

The German report is valid insofar that we do not have anything better at the moment. We will not remove items from the list, we publish updates to the list. If you (or anybody else) can find a more up-to-date list, then the list will be updated. Meanwhile I have updated the article in respect of Puerto Rico. Martinvl (talk) 12:44, 21 May 2013 (UTC)

Martin,

The giz report was wrong about Puerto Rico and is also wrong about Burma. Burma was under British rule and used the UK gallon. I can see them continuing to use the UK gallon if they never metricated. I can't see them go through the expense of switching to US gallons. Here is an article that clearly shows the prices in gallons with a reference to the conversion to litres using the UK gallon to litre conversion: http://www.burmanet.org/news/2011/03/17/myanmar-times-petrol-prices-soar-25-percent-juliet-shwe-gaung/

http://www.oilseedcrops.org/2013/04/25/petrol-prices-around-yangon-myanmar-april-2013-1870-kyat/

This station appears to be selling petrol in litres in Myanmar and the price is around 1 $US/L. If you compare the prices stated to those in the picture they are the same. The pricing is from 2013-04-25. Did Myanmar metricate its pumps since 2010/2011?

From this webpage from 2011,

http://www.burmanet.org/news/2011/03/17/myanmar-times-petrol-prices-soar-25-percent-juliet-shwe-gaung/

In some major cities, such as Myitkyina in Kachin State, the price of a gallon (4.57 litres) of petrol has risen to K5500, while in central Myanmar the price was hovering around K4800 a gallon when The Myanmar Times went to print.

In Yangon, the petrol price rose from K3200 a gallon in early February to K3600 on March 6. On March 9 it had risen to K3800 and hit K4000 the following day, sources said, while a gallon of diesel was being sold for K3800, up only slightly on a month ago.

The prices when converted to kyats per litres: 5000 -->1203.50; 4800 --> 1050.30; 3200 --> 700.20; 3600 --> 787.75; 3800 --> 831.50; 4000 --> 875.30

This page from 2011 shows gallon prices:

http://www.mmtimes.com/201129568.html

The litre prices of 2011 are in the same price range as the litre prices in the oilseedcrop picture. This indicates that even though the press, some stations and the government may be quoting prices in imperial gallons, some pumps are dispensing in litres. — Preceding unsigned comment added by 68.105.199.216 (talk) 15:24, 2 June 2013 (UTC)

Wikipedia is about verifiability, not truth. The GIZ report is the best comprehensive report that has been found to date. It will continue to be used as the yardstick for this article and changes or exceptions will only be made if reliable sources indicate otherwise. Of course, if you can find reliable source that indicate changes to the GIZ list, please make them public. The arguments that you made in your earlier posting are observations of individual cases, not statements about the country in general. Martinvl (talk) 17:19, 2 June 2013 (UTC)

Changes to usage - 16 October 2013

I have reworded the usage of the gallon in the lede. In particular I removed the word "Commonwealth" - the only Commonwealth countries where the gallon is used is the UK, Canada and some Caribbean countries and these have already been mentioned. I also replaced the words "throughout The Americas" with the words "some Latin American and Caribbean" on grounds that the Imperial gallon is used in parts of the Caribbean and in Canada, while many Latin American countries, notable the three largest - Mexico, Argentina and Brazil use the litre. Martinvl (talk) 05:00, 16 October 2013 (UTC)

Thanks Martin, that was a lot better than my wording. I guess part of it, honestly, is being too lazy to go back in and rewrite the entire paragraph to weave together multiple different threads from different authors. My use of "The Americas" was for lack of a better word and ease. One thing, Belize uses the Imperial gallon per the British custom; they're part of CARICOM, but aren't a proper Caribbean nation, at least not by my reckoning. I wasn't trying to give the impression that gallons are used everywhere in N. and S. America, rather that their uses is kind of splattered about, different gallons in different spots not really following a particular pattern.Surveyor792 (talk) 21:49, 19 October 2013 (UTC)

U.S. Dry / Corn Gallon

I'd like to voice an objection to the "dry gallon" being used in this article at all. As mentioned, I believe somewhere in this article or another perhaps the bushel, the "dry gallon" isn't even mentioned in the US statute. Further in "peck," the picture shows a bag of apples labeled as "1/2 peck," showing that the unit is not accepted in packaging either.

It may have existed historically, but, in practice, only the dry quart, pint, peck, and bushel are encountered (even here, weight is often considered, as per the article) with the volume being more of a historical derivation. While the historical use of the corn? gallon shouldn't be completely erased, I think it is bad wording to imply that the dry gallon is still used. Three units derived from it are. Surveyor792 (talk) 21:49, 19 October 2013 (UTC)

lit3r$

Honestly not sure why this is coming up here, but it's not OK to just use a symbol for the cubic decimeter, even if we all know what it is, without at least one instance where it is spelled out. That is akin to using a pronoun without identifying, first, the subject.

I don't care whether we go for -er -re either, but when I see someone come in and change nothing but my spelling of the word, that is incredibly pedantic. If you'd bother to read down the page you'll see the article is littered with inconsistency in this regard. I don't mess with British spellings, and expect my grade- and high-school education to be honored as well.

We should be consistent in the spelling of a given word. The majority of uses in the article were "litre", so I simply altered the two occurrences of "liter" to "litre". If you want, change them all to "liter"; there's a good case to consider an article about "gallon" having stronger ties to US English than to any other. It's the normal Wikipedia principle to be consistent within an article, as per WP:ARTCON. Peter coxhead (talk) 22:28, 19 October 2013 (UTC)

As to the liter, why does it enjoy such prominence in the article on gallon? "In most localities it has been replaced as the unit of capacity by the litre." What is this doing in the article? IF it is meant to refer to western european countries that used gallons at one time in their history, this is unclear, and incorrect. In Western Europe it has been replaced in ALL countries that formerly used some sort of variant of the gallon.

This sentence should be clarified or removed. Since the current use of the unit is of primary importance, shouldn't this be given lower priority and moved, perhaps down the page to the section that deals with this? Most users of this page will be concerned first with the Queen Anne Wine / US gallon and second with the Imperial gallon. — Preceding unsigned comment added by Surveyor792 (talk • contribs) 22:13, 19 October 2013 (UTC)

I don't see that the second paragraph is needed at all in the lead section, so I would be inclined to remove both of its sentences. As you say, the main interest of the article is the US and Imperial gallon for liquid measurement.

I came by here because I wanted to understand the relationship between the US and Imperial gallon. Curiously, the main reason for the difference, namely that there are 16 US fl. oz to a US pint but 20 Imperial fl. oz to an Imperial pint (the fluid ounces are quite close in volume), wasn't in the article very clearly and could still usefully be explained more prominently. Peter coxhead (talk) 22:28, 19 October 2013 (UTC)

Notability of "Ten Gallon" Hat in Article Considering the Name's Corrupted Origins

From the main Wikipedia article on the article of clothing:

One theory is that the term "ten-gallon" is a corruption of the Spanish modifier tan galán, which loosely translates as "really handsome"[28] or "so fine". For example, un sombrero tan galán translates as "such a fine hat". Another theory is that the term "ten-gallon" is a corruption of the Spanish term galón, which means "galloon", a type of narrow braided trimming around the crown, possibly a style adapted by Spanish cowboys. When Texas cowboys misunderstood the word galón for "gallon", the popular, though incorrect, legend may have been born. According to Reynolds and Rand, "The term ten-gallon did not originally refer to the holding capacity of the hat, but to the width of a Mexican sombrero hatband, and is more closely related to this unit of measurement by the Spanish than to the water-holding capacity of a Stetson.”[29]

Since the name is most likely a corruption, it is at best a notable curiosity, and not a good indication of the unit "Gallon." Is it really worthkeeping here?Surveyor792 (talk) 05:12, 26 October 2013 (UTC)

Even if it wasn't a completely broken accounting of origin, having a 10 gallon hat appear under a section of how gallons are used is a H---U---G---E stretch. Anyone else want it gone? Tgm1024 (talk) 02:06, 23 September 2017 (UTC)

The section is also unsourced. Maybe put it in the "see also" section but I wouldn't mind seeing it disappear. Kendall-K1 (talk) 23:06, 27 September 2017 (UTC)

The size of a US gallon

The article says

"the US gallon, which is equal to approximately 3.785 litres...".

This is true, but why not say

"the US gallon, which is equal to exactly 3.785411784 litres"

one gallon is exactly 231 cubic inches

one inch is exactly 0.254 decimetres

one cubic inch is exactly 0.254^3 cubic decimetres

one litre is exactly one cubic decimeter

so one US gallon is 231 x 0.254 x 0.254 x 0.254 litres = 3.785411784 exactly

. . Jim - Jameslwoodward (talk to me • contribs) 15:10, 28 March 2015 (UTC)

The exact value is given in the table lower down. Dbfirs 17:28, 28 March 2015 (UTC)

Gallon in Canada

So we all know that "Gallon" in Canada can mean Imperial or US gallons. But in commercial cooking in Canada "gallon" also means 4 liters in at least some parts of the country. The place where most non-cooks would run into this is a phrase like "can you put a gallon of milk (4L) in the cart?" I do not have a source for this, but I've personally experienced it in 3 different provinces, so I know it happens. I've really grown to loath the fuzziness of the word "gallon". — Gopher65_talk 23:22, 25 September 2015 (UTC)

Canada stopped using Gallons in 1979... we buy milk, gas etc... in litres since metrification.

source: https://www.thecanadianencyclopedia.ca/en/article/metric-conversion — Preceding unsigned comment added by Bitgrazer (talk • contribs) 00:04, 22 January 2020 (UTC)

Yes the country metrified, but that's not he same as saying that Canada simply stopped using all imperial units at that time. Many of the imperial units are still in use. Produce and meat are priced in both metric and imperial units, and the price per pound is the first and largest, and sometimes the only price for example. Some items that are labelled in metric units are still actually in imperial-sized quantities. Butter is sold in 454 gram sticks, exactly one pound, and no-one I know ever says "get 454 g of butter". You might want to actually read the source you are listing... "Despite the shift, many Canadians still express certain measurements in imperial units, such as height (feet and inches)." Transport Canada was still listing miles per gallon for vehicle efficiency as recently as 2010. Meters (talk) 07:39, 22 January 2020 (UTC)

Queen Anne

@PetesGuide: Before 1702 there was no Queen Anne. So how could there have been a Queen Anne gallon? Kendall-K1 (talk) 03:03, 6 September 2016 (UTC)

I believe that as with the "Winchester bushel", the name was coined years after its creation. Prior to 1702 it surely had a different name, but it may have been lost to history.Peter K. Sheerin 00:38, 13 September 2016 (UTC) — Preceding unsigned comment added by PetesGuide (talk • contribs)

External links modified

Hello fellow Wikipedians,

I have just modified 3 external links on Gallon. Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:

• Added {{dead link}} tag to http://webarchive.nationalarchives.gov.uk/+/http:/
• Added archive https://web.archive.org/web/20131002102212/http://assets.antiguaobserver.com/2011/12/BUDGET-STATEMENT-2012.pdf to http://assets.antiguaobserver.com/2011/12/BUDGET-STATEMENT-2012.pdf
• Added archive https://web.archive.org/web/20151222145630/http://www.thevoiceslu.com/local_news/2013/july/09_07_13/Rotary.htm to http://www.thevoiceslu.com/local_news/2013/july/09_07_13/Rotary.htm
• Added {{dead link}} tag to http://www.caribmillers.com/content/gas-prices-guyoil-stations-remain-below-1000-mark
• Added archive https://web.archive.org/web/20130525024249/http://www.newsroompanama.com:80/business/5569-liters-replace-gallons-at-pump-as-panama-goes-metric.html to http://www.newsroompanama.com/business/5569-liters-replace-gallons-at-pump-as-panama-goes-metric.html
• Added {{dead link}} tag to http://www.guampdn.com/article/20130808/NEWS01/130808005/UPDATE-Gas-prices-down-10-cents-4-73-gallon-unleaded
• Added {{dead link}} tag to http://virginislandsdailynews.com/news/7-cent-per-gallon-wapa-tax-goes-into-effect-1.1344082

When you have finished reviewing my changes, you may follow the instructions on the template below to fix any issues with the URLs.

This message was posted before February 2018. After February 2018, "External links modified" talk page sections are no longer generated or monitored by InternetArchiveBot. No special action is required regarding these talk page notices, other than regular verification using the archive tool instructions below. Editors have permission to delete these "External links modified" talk page sections if they want to de-clutter talk pages, but see the RfC before doing mass systematic removals. This message is updated dynamically through the template {{source check}} (last update: 18 January 2022).

• If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
• If you found an error with any archives or the URLs themselves, you can fix them with this tool.

Cheers.—InternetArchiveBot (Report bug) 12:53, 7 January 2017 (UTC)

External links modified

Hello fellow Wikipedians,

I have just modified 2 external links on Gallon. Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:

• Added archive https://web.archive.org/web/20120116182201/http://www.cbji.com/makingnews.aspx?id=692 to http://www.cbji.com/makingnews.aspx?id=692
• Added archive https://web.archive.org/web/20160304201034/http://www.samoanews.com/?q=node%2F76479 to http://www.samoanews.com/?q=node%2F76479

When you have finished reviewing my changes, you may follow the instructions on the template below to fix any issues with the URLs.

This message was posted before February 2018. After February 2018, "External links modified" talk page sections are no longer generated or monitored by InternetArchiveBot. No special action is required regarding these talk page notices, other than regular verification using the archive tool instructions below. Editors have permission to delete these "External links modified" talk page sections if they want to de-clutter talk pages, but see the RfC before doing mass systematic removals. This message is updated dynamically through the template {{source check}} (last update: 18 January 2022).

• If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
• If you found an error with any archives or the URLs themselves, you can fix them with this tool.

Cheers.—InternetArchiveBot (Report bug) 23:55, 20 May 2017 (UTC)

Pints in the lead

I've reverted the addition of "8 pints" to the lead. I think this is too confusing for the lead. If we put this in, we have to explain that an Imperial gallon is 8 Imperial pints, a US gallon is 8 US pints, and an Imperial pint is bigger than a US pint. This is just too much for the lead of an article that is not about pints. Kendall-K1 (talk) 01:59, 27 November 2017 (UTC)

It seems to me that we address this by specifying "(8 Imperial pints)". There's no need to explain further in the lede (anyone interested can click on the link). Dondervogel 2 (talk) 10:02, 27 November 2017 (UTC)

We absolutely need this or something like it in the lede or in the sidebar. Many people are going to come to this page in order to find out exactly this bit of information and will want to see it in a prominent place. Perhaps if you feel strongly about not including it in the lede, then the sidebar could be the right place? More people will want to know that there are 8 imperial pints in the imperial gallon than 1.200950 US gal. Personally, though, I'd just have (8 imperial pints) and (8 US pints) after the respective units, and have done with it. We currently have litre amounts for three of them but you don't seem to think that seems "too much for the lead of an article that is not about litres"! That one is bigger than the other isn't something we need to say. Porphyro (talk) 11:47, 7 December 2017 (UTC)

It seems like confusing clutter to me, but I have added both kinds of pints to the lead. Kendall-K1 (talk) 19:49, 7 December 2017 (UTC)

So the one thing that doesn't seem like confusing clutter to me is the size of a US gallon in standard units. The first thing I want to know about some obscure unit like this is "how big is it?" Kendall-K1 (talk) 22:56, 7 December 2017 (UTC)

The unit is converted 3-ways which seems way ott for the lede, and the fact that it's equal to 8 pints seems a more intuitive way of introducing it to me (the reader wanting to see all these units ranked in terms of their size can easily read the article). Hard to GAF about this though so happy to just leave it like it is. Dondervogel 2 (talk) 23:10, 7 December 2017 (UTC)

Yeah agreed with Dondervogel, I'm happy with the article as it currently stands anyway. Porphyro (talk) 13:03, 8 December 2017 (UTC)

Canada

The cited Transport Canada source does seem to support what we say about the Canadian gallon: "1 Canadian gallon = 0.8327 U.S. gallons and 1 Canadian mpg = 1.2 U.S. mpg." I will fix the archive url. Kendall-K1 (talk) 04:44, 31 July 2018 (UTC)