EMC EA/EB

From Wikipedia, the free encyclopedia
(Redirected from EMD EB)
EMC EA/EB
B&O EA 51 on the Capitol Limited sitting next to the Tom Thumb locomotive replica, in 1937.
Type and origin
Power typeDiesel-electric
BuilderElectro-Motive Corporation (EMC)
Build dateMay 16th, 1937–1938
Total produced6 A units, 6 B units
Specifications
Configuration:
 • AARA1A-A1A
Gauge4 ft 8+12 in (1,435 mm)
Prime moverWinton 201-A, twinned
Engine type60 degree V
Cylinders12 x 2
Performance figures
Maximum speed~68-99.4 mph
Power output1,800 hp (1,300 kW)
Career
OperatorsBaltimore and Ohio Railroad, Alton Railroad, Gulf, Mobile and Ohio
Numbers51–56 (A units), 51X–56X (B units)
Dispositionnumber 51 on static display at the Baltimore and Ohio Railroad Museum

The EMC EA/EB is an early passenger train-hauling diesel locomotive built from May 16, 1937, to 1938 by Electro-Motive Corporation of La Grange, Illinois for the Baltimore and Ohio Railroad.[1][page needed] They were the first model in a long line of passenger diesels of similar design known as EMD E-units. Each locomotive unit developed 1,800 horsepower (1,300 kW) from two 900 hp (670 kW) Winton 201-A diesel engines, driving the wheels through an electric transmission—the generator driven by each engine provided current for traction motors. The locomotives were of A1A-A1A wheel arrangement—two three-axle trucks of which only the outer two axles were powered. Six two-unit 3,600 hp (2,700 kW) locomotives were produced, each consisting of a lead cab-equipped EA A unit and a cabless booster EB B unit. They were numbered 51 through 56; the A units bore the bare number and the B units the number followed by 'X'.

Trains hauled[edit]

The six locomotives hauled some of the major named trains of the B&O; the Royal Blue, the Capitol Limited, the National Limited, and others. These trains were streamliners in appearance, but they were built largely of refurbished heavyweight passenger cars rebuilt with smooth sides, smooth rooflines, air conditioning, new interiors and modern appointments.

B&O 52 was sold to the Alton Railroad in 1940. This locomotive became a Gulf, Mobile and Ohio Railroad unit in 1947.

Significance and influence[edit]

The EA/EB—along with the more-or-less simultaneous E1 for the Atchison, Topeka and Santa Fe Railway and the E2 for the Union Pacific Railroad, Chicago and North Western Railway and Southern Pacific Railroad—represented an important step in the evolution of the passenger diesel locomotive. While the EA, E1 and E2 were each built for a specific railroad, they were largely identical mechanically and were a step further away from the custom-built, integrated streamliner and towards mass-produced passenger locomotives—a step achieved with the E3 and E6, EMD's later models.

Styling[edit]

The EA/EB and E1 featured largely identical and innovative styling showing the influence of the Electro-Motive Corporation's new buyer General Motors. While mechanically they had much in common with previous, experimental EMC locomotives, GM understood the importance of looking new and exciting, not merely being technically innovative. This basic "slant nose" style was continued in the subsequent E3, E4, E5 and E6 models, while a more "bulldog nose" style was tried in the E2 and a style somewhere in between was used for the E7, E8 and E9, as well as the EMD F-Units.

Its initial design was protected under US Patent D106,918.[2]

Preservation[edit]

B&O #51, the first EA built, has been preserved at the Baltimore and Ohio Railroad Museum in Baltimore, Maryland. The EA has completed cosmetic restoration and is now on exhibit.[3]

References[edit]

Notes[edit]

  1. ^ Pinkepank 1973.
  2. ^ US patent D106918, Harold L. Hamilton, Richard M. Dilworth, Martin P Blomberg, Leland A. Knickerbocker, and Chris J. Klein, "Design for a Locomotive Body", issued 1937-11-09 
  3. ^ "B&O Railroad Museum Unveils 1937 Locomotive Restoration". railpace.com. 26 January 2021. Retrieved 29 January 2021.

Bibliography[edit]