User:Hfastedge/diffTest

From Wikipedia, the free encyclopedia

VERSION = 2 PATCHLEVEL = 5 SUBLEVEL = 44 EXTRAVERSION =

  1. *DOCUMENTATION*
  2. To see a list of typical targets execute "make help"
  3. More info can be located in ./Documentation/kbuild
  4. Comments in this file are targeted only to the developer, do not
  5. expect to learn how to build the kernel reading this file.
  1. We are using a recursive build, so we need to do a little thinking
  2. to get the ordering right.
  3. Most importantly: sub-Makefiles should only ever modify files in
  4. their own directory. If in some directory we have a dependency on
  5. a file in another dir (which doesn't happen often, but it's of
  6. unavoidable when linking the built-in.o targets which finally
  7. turn into vmlinux), we will call a sub make in that other dir, and
  8. after that we are sure that everything which is in that other dir
  9. is now up to date.
  10. The only cases where we need to modify files which have global
  11. effects are thus separated out and done before the recursive
  12. descending is started. They are now explicitly listed as the
  13. prepare rule.

KERNELRELEASE=$(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)

  1. SUBARCH tells the usermode build what the underlying arch is. That is set
  2. first, and if a usermode build is happening, the "ARCH=um" on the command
  3. line overrides the setting of ARCH below. If a native build is happening,
  4. then ARCH is assigned, getting whatever value it gets normally, and
  5. SUBARCH is subsequently ignored.

SUBARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ -e s/arm.*/arm/ -e s/sa110/arm/) ARCH := $(SUBARCH)

KERNELPATH=kernel-$(shell echo $(KERNELRELEASE) | sed -e "s/-//g")

CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \ else if [ -x /bin/bash ]; then echo /bin/bash; \ else echo sh; fi ; fi) TOPDIR := $(CURDIR)

HOSTCC = gcc HOSTCFLAGS = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer

CROSS_COMPILE =

  1. That's our default target when none is given on the command line

all: vmlinux

  1. Decide whether to build built-in, modular, or both.
  2. Normally, just do built-in.

KBUILD_MODULES := KBUILD_BUILTIN := 1

  1. If we have only "make modules", don't compile built-in objects.

ifeq ($(MAKECMDGOALS),modules)

 KBUILD_BUILTIN :=

endif

  1. If we have "make <whatever> modules", compile modules
  2. in addition to whatever we do anyway.

ifneq ($(filter modules,$(MAKECMDGOALS)),)

 KBUILD_MODULES := 1

endif

  1. Just "make" or "make all" shall build modules as well

ifeq ($(MAKECMDGOALS),)

 KBUILD_MODULES := 1

endif

ifneq ($(filter all,$(MAKECMDGOALS)),)

 KBUILD_MODULES := 1

endif

export KBUILD_MODULES KBUILD_BUILTIN KBUILD_VERBOSE

  1. Beautify output
  2. ---------------------------------------------------------------------------
  3. Normally, we echo the whole command before executing it. By making
  4. that echo $($(quiet)$(cmd)), we now have the possibility to set
  5. $(quiet) to choose other forms of output instead, e.g.
  6. quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
  7. cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
  8. If $(quiet) is empty, the whole command will be printed.
  9. If it is set to "quiet_", only the short version will be printed.
  10. If it is set to "silent_", nothing wil be printed at all, since
  11. the variable $(silent_cmd_cc_o_c) doesn't exist.
  1. For now, leave verbose as default

ifndef KBUILD_VERBOSE

 KBUILD_VERBOSE = 1

endif

MAKEFLAGS += --no-print-directory

  1. If the user wants quiet mode, echo short versions of the commands
  2. only

ifneq ($(KBUILD_VERBOSE),1)

 quiet=quiet_

endif

  1. If the user is running make -s (silent mode), suppress echoing of
  2. commands

ifneq ($(findstring s,$(MAKEFLAGS)),)

 quiet=silent_

endif

export quiet KBUILD_VERBOSE

  1. Paths to obj / src tree

src := . obj := . srctree := . objtree := .

export srctree objtree

  1. Make variables (CC, etc...)

AS = $(CROSS_COMPILE)as LD = $(CROSS_COMPILE)ld CC = $(CROSS_COMPILE)gcc CPP = $(CC) -E AR = $(CROSS_COMPILE)ar NM = $(CROSS_COMPILE)nm STRIP = $(CROSS_COMPILE)strip OBJCOPY = $(CROSS_COMPILE)objcopy OBJDUMP = $(CROSS_COMPILE)objdump MAKEFILES = .config GENKSYMS = /sbin/genksyms DEPMOD = /sbin/depmod KALLSYMS = /sbin/kallsyms PERL = perl MODFLAGS = -DMODULE CFLAGS_MODULE = $(MODFLAGS) AFLAGS_MODULE = $(MODFLAGS) CFLAGS_KERNEL = AFLAGS_KERNEL = NOSTDINC_FLAGS = -nostdinc -iwithprefix include

CPPFLAGS := -D__KERNEL__ -Iinclude CFLAGS := $(CPPFLAGS) -Wall -Wstrict-prototypes -Wno-trigraphs -O2 \ -fomit-frame-pointer -fno-strict-aliasing -fno-common AFLAGS := -D__ASSEMBLY__ $(CPPFLAGS)

export VERSION PATCHLEVEL SUBLEVEL EXTRAVERSION KERNELRELEASE ARCH \ CONFIG_SHELL TOPDIR HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC \ CPP AR NM STRIP OBJCOPY OBJDUMP MAKE MAKEFILES GENKSYMS PERL

export CPPFLAGS NOSTDINC_FLAGS OBJCOPYFLAGS LDFLAGS export CFLAGS CFLAGS_KERNEL CFLAGS_MODULE export AFLAGS AFLAGS_KERNEL AFLAGS_MODULE

  1. The temporary file to save gcc -MD generated dependencies must not
  2. contain a comma

depfile = $(subst $(comma),_,$(@D)/.$(@F).d)

noconfig_targets := xconfig menuconfig config oldconfig randconfig \ defconfig allyesconfig allnoconfig allmodconfig \ clean mrproper distclean \ help tags TAGS sgmldocs psdocs pdfdocs htmldocs \ checkconfig checkhelp checkincludes

RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS \) -prune -o RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn --exclude CVS

  1. Helpers built in scripts/
  2. ---------------------------------------------------------------------------

scripts/docproc scripts/fixdep scripts/split-include : scripts ;

.PHONY: scripts scripts: +@$(call descend,scripts,)

  1. Objects we will link into vmlinux / subdirs we need to visit
  2. ---------------------------------------------------------------------------

init-y := init/ drivers-y := drivers/ sound/ net-y := net/ libs-y := lib/ core-y := SUBDIRS :=

ifeq ($(filter $(noconfig_targets),$(MAKECMDGOALS)),)

include-config := 1

-include .config

endif

include arch/$(ARCH)/Makefile

core-y += kernel/ mm/ fs/ ipc/ security/

SUBDIRS += $(patsubst %/,%,$(filter %/, $(init-y) $(init-m) \ $(core-y) $(core-m) $(drivers-y) $(drivers-m) \ $(net-y) $(net-m) $(libs-y) $(libs-m)))

ALL_SUBDIRS  := $(SUBDIRS) $(patsubst %/,%,$(filter %/, $(init-n) $(init-) \ $(core-n) $(core-) $(drivers-n) $(drivers-) \ $(net-n) $(net-) $(libs-n) $(libs-)))

init-y := $(patsubst %/, %/built-in.o, $(init-y)) core-y := $(patsubst %/, %/built-in.o, $(core-y)) drivers-y := $(patsubst %/, %/built-in.o, $(drivers-y)) net-y := $(patsubst %/, %/built-in.o, $(net-y)) libs-y := $(patsubst %/, %/lib.a, $(libs-y))

ifdef include-config

  1. Here goes the main Makefile
  2. ===========================================================================
  3. If the user gave a *config target, it'll be handled in another
  4. section below, since in this case we cannot include .config
  5. Same goes for other targets like clean/mrproper etc, which
  6. don't need .config, either
  1. In this section, we need .config
  1. If .config doesn't exist - tough luck

.config: arch/$(ARCH)/config.in # FIXME $(shell find . -name Config.in) @echo '***' @if [ -f $@ ]; then \ echo '*** The tree was updated, so your .config may be'; \ echo '*** out of date!'; \ else \ echo '*** You have not yet configured your kernel!'; \ fi @echo '***' @echo '*** Please run some configurator (e.g. "make oldconfig" or' @echo '*** "make menuconfig" or "make xconfig").' @echo '***' @exit 1

ifdef CONFIG_MODULES export EXPORT_FLAGS := -DEXPORT_SYMTAB endif

  1. INSTALL_PATH specifies where to place the updated kernel and system map
  2. images. Uncomment if you want to place them anywhere other than root.
  1. export INSTALL_PATH=/boot
  1. INSTALL_MOD_PATH specifies a prefix to MODLIB for module directory
  2. relocations required by build roots. This is not defined in the
  3. makefile but the arguement can be passed to make if needed.

MODLIB := $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE) export MODLIB

  1. Build vmlinux
  2. ---------------------------------------------------------------------------
  1. This is a bit tricky: If we need to relink vmlinux, we want
  2. the version number incremented, which means recompile init/version.o
  3. and relink init/init.o. However, we cannot do this during the
  4. normal descending-into-subdirs phase, since at that time
  5. we cannot yet know if we will need to relink vmlinux.
  6. So we descend into init/ inside the rule for vmlinux again.

vmlinux-objs := $(HEAD) $(init-y) $(core-y) $(libs-y) $(drivers-y) $(net-y)

quiet_cmd_vmlinux__ = LD $@ define cmd_vmlinux__ $(LD) $(LDFLAGS) $(LDFLAGS_vmlinux) $(HEAD) $(init-y) \ --start-group \ $(core-y) \ $(libs-y) \ $(drivers-y) \ $(net-y) \ --end-group \ $(filter .tmp_kallsyms%,$^) \ -o $@ endef

  1. set -e makes the rule exit immediately on error

define rule_vmlinux__ set -e $(if $(filter .tmp_kallsyms%,$^),, echo ' Generating build number' . scripts/mkversion > .tmp_version mv -f .tmp_version .version +$(call descend,init,) ) $(call cmd,vmlinux__) echo 'cmd_$@ := $(cmd_vmlinux__)' > $(@D)/.$(@F).cmd endef

define rule_vmlinux $(rule_vmlinux__) $(NM) $@ | grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | sort > System.map endef

LDFLAGS_vmlinux += -T arch/$(ARCH)/vmlinux.lds.s

  1. Generate section listing all symbols and add it into vmlinux
  2. It's a three stage process:
  3. o .tmp_vmlinux1 has all symbols and sections, but __kallsyms is
  4. empty
  5. Running kallsyms on that gives as .tmp_kallsyms1.o with
  6. the right size
  7. o .tmp_vmlinux2 now has a __kallsyms section of the right size,
  8. but due to the added section, some addresses have shifted
  9. From here, we generate a correct .tmp_kallsyms2.o
  10. o The correct .tmp_kallsyms2.o is linked into the final vmlinux.

ifdef CONFIG_KALLSYMS

kallsyms.o := .tmp_kallsyms2.o

quiet_cmd_kallsyms = KSYM $@ cmd_kallsyms = $(KALLSYMS) $< > $@

.tmp_kallsyms1.o: .tmp_vmlinux1 $(call cmd,kallsyms)

.tmp_kallsyms2.o: .tmp_vmlinux2 $(call cmd,kallsyms)

.tmp_vmlinux1: $(vmlinux-objs) arch/$(ARCH)/vmlinux.lds.s FORCE $(call if_changed_rule,vmlinux__)

.tmp_vmlinux2: $(vmlinux-objs) .tmp_kallsyms1.o arch/$(ARCH)/vmlinux.lds.s FORCE $(call if_changed_rule,vmlinux__)

endif

  1. Finally the vmlinux rule

vmlinux: $(vmlinux-objs) $(kallsyms.o) arch/$(ARCH)/vmlinux.lds.s FORCE $(call if_changed_rule,vmlinux)

  1. The actual objects are generated when descending,
  2. make sure no implicit rule kicks in

$(sort $(vmlinux-objs)): $(SUBDIRS) ;

  1. Handle descending into subdirectories listed in $(SUBDIRS)

.PHONY: $(SUBDIRS) $(SUBDIRS): .hdepend prepare +@$(call descend,$@,)

  1. Things we need done before we descend to build or make
  2. module versions are listed in "prepare"

.PHONY: prepare prepare: include/linux/version.h include/asm include/config/MARKER @echo ' Starting the build. KBUILD_BUILTIN=$(KBUILD_BUILTIN) KBUILD_MODULES=$(KBUILD_MODULES)'

  1. This can be used by arch/$ARCH/Makefile to preprocess
  2. their vmlinux.lds.S file

AFLAGS_vmlinux.lds.o += -P -C -U$(ARCH)

arch/$(ARCH)/vmlinux.lds.s: %.s: %.S scripts FORCE $(call if_changed_dep,as_s_S)

targets += arch/$(ARCH)/vmlinux.lds.s

  1. Single targets
  2. ---------------------------------------------------------------------------

%.s: %.c scripts FORCE +@$(call descend,$(@D),$@) %.i: %.c scripts FORCE +@$(call descend,$(@D),$@) %.o: %.c scripts FORCE +@$(call descend,$(@D),$@) %.lst: %.c scripts FORCE +@$(call descend,$(@D),$@) %.s: %.S scripts FORCE +@$(call descend,$(@D),$@) %.o: %.S scripts FORCE +@$(call descend,$(@D),$@)

  1. FIXME: The asm symlink changes when $(ARCH) changes. That's
  2. hard to detect, but I suppose "make mrproper" is a good idea
  3. before switching between archs anyway.

include/asm: @echo ' Making asm->asm-$(ARCH) symlink' @ln -s asm-$(ARCH) $@

  1. Split autoconf.h into include/linux/config/*

include/config/MARKER: scripts/split-include include/linux/autoconf.h @echo ' SPLIT include/linux/autoconf.h -> include/config/*' @scripts/split-include include/linux/autoconf.h include/config @touch $@

  1. if .config is newer than include/linux/autoconf.h, someone tinkered
  2. with it and forgot to run make oldconfig

include/linux/autoconf.h: .config @echo '***' @echo '*** You changed .config w/o running make *config?' @echo '*** Please run "make oldconfig"' @echo '***' @exit 1

  1. Generate some files
  2. ---------------------------------------------------------------------------
  1. version.h changes when $(KERNELRELEASE) etc change, as defined in
  2. this Makefile

uts_len := 64

include/linux/version.h: Makefile @if expr length "$(KERNELRELEASE)" \> $(uts_len) >/dev/null ; then \ echo '"$(KERNELRELEASE)" exceeds $(uts_len) characters' >&2; \ exit 1; \ fi; @echo -n ' Generating $@' @(echo \#define UTS_RELEASE \"$(KERNELRELEASE)\"; \ echo \#define LINUX_VERSION_CODE `expr $(VERSION) \\* 65536 + $(PATCHLEVEL) \\* 256 + $(SUBLEVEL)`; \ echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))'; \ ) > $@.tmp @$(update-if-changed)

  1. Generate module versions
  2. ---------------------------------------------------------------------------
  1. The targets are still named depend / dep for traditional
  2. reasons, but the only thing we do here is generating
  3. the module version checksums.

.PHONY: depend dep $(patsubst %,_sfdep_%,$(SUBDIRS))

depend dep: .hdepend

  1. .hdepend is our (misnomed) marker for whether we've
  2. generated module versions

make-versions := $(strip $(if $(filter dep depend,$(MAKECMDGOALS)),1) \ $(if $(wildcard .hdepend),,1))

.hdepend: prepare FORCE ifneq ($(make-versions),) @$(MAKE) include/linux/modversions.h @touch $@ endif

ifdef CONFIG_MODVERSIONS

  1. Update modversions.h, but only if it would change.

include/linux/modversions.h: FORCE @rm -rf .tmp_export-objs @$(MAKE) $(patsubst %,_sfdep_%,$(SUBDIRS)) @echo -n ' Generating $@' @( echo "#ifndef _LINUX_MODVERSIONS_H";\ echo "#define _LINUX_MODVERSIONS_H"; \ echo "#include <linux/modsetver.h>"; \ cd .tmp_export-objs >/dev/null; \ for f in `find modules -name \*.ver -print | sort`; do \ echo "#include <linux/$${f}>"; \ done; \ echo "#endif"; \ ) > $@.tmp; \ $(update-if-changed)

$(patsubst %,_sfdep_%,$(SUBDIRS)): FORCE +@$(call descend,$(patsubst _sfdep_%,%,$@),fastdep)

else # !CONFIG_MODVERSIONS

.PHONY: include/linux/modversions.h

include/linux/modversions.h:

endif # CONFIG_MODVERSIONS

  1. ---------------------------------------------------------------------------
  2. Modules

ifdef CONFIG_MODULES

  1. Build modules

ifdef CONFIG_MODVERSIONS MODFLAGS += -include include/linux/modversions.h endif

.PHONY: modules modules: $(SUBDIRS)

  1. Install modules

.PHONY: modules_install modules_install: _modinst_ $(patsubst %, _modinst_%, $(SUBDIRS)) _modinst_post

.PHONY: _modinst_ _modinst_: @rm -rf $(MODLIB)/kernel @rm -f $(MODLIB)/build @mkdir -p $(MODLIB)/kernel @ln -s $(TOPDIR) $(MODLIB)/build

  1. If System.map exists, run depmod. This deliberately does not have a
  2. dependency on System.map since that would run the dependency tree on
  3. vmlinux. This depmod is only for convenience to give the initial
  4. boot a modules.dep even before / is mounted read-write. However the
  5. boot script depmod is the master version.

ifeq "$(strip $(INSTALL_MOD_PATH))" "" depmod_opts := else depmod_opts := -b $(INSTALL_MOD_PATH) -r endif .PHONY: _modinst_post _modinst_post: if [ -r System.map ]; then $(DEPMOD) -ae -F System.map $(depmod_opts) $(KERNELRELEASE); fi

.PHONY: $(patsubst %, _modinst_%, $(SUBDIRS)) $(patsubst %, _modinst_%, $(SUBDIRS)) : +@$(call descend,$(patsubst _modinst_%,%,$@),modules_install)

else # CONFIG_MODULES

  1. Modules not configured
  2. ---------------------------------------------------------------------------

modules modules_install: FORCE @echo @echo "The present kernel configuration has modules disabled." @echo "Type 'make config' and enable loadable module support." @echo "Then build a kernel with module support enabled." @echo @exit 1

endif # CONFIG_MODULES

  1. Generate asm-offsets.h
  2. ---------------------------------------------------------------------------

define generate-asm-offsets.h (set -e; \ echo "#ifndef __ASM_OFFSETS_H__"; \ echo "#define __ASM_OFFSETS_H__"; \ echo "/*"; \ echo " * DO NOT MODIFY."; \ echo " *"; \ echo " * This file was generated by arch/$(ARCH)/Makefile"; \ echo " *"; \ echo " */"; \ echo ""; \ sed -ne "/^->/{s:^->\([^ ]*\) [\$$#]*\([^ ]*\) \(.*\):#define \1 \2 /* \3 */:; s:->::; p;}"; \ echo ""; \ echo "#endif" ) endef

  1. RPM target
  2. ---------------------------------------------------------------------------
  1. If you do a make spec before packing the tarball you can rpm -ta it

spec: . scripts/mkspec >kernel.spec

  1. Build a tar ball, generate an rpm from it and pack the result
  2. There arw two bits of magic here
  3. 1) The use of /. to avoid tar packing just the symlink
  4. 2) Removing the .dep files as they have source paths in them that
  5. will become invalid

rpm: clean spec find . $(RCS_FIND_IGNORE) \ \( -size 0 -o -name .depend -o -name .hdepend \) \ -type f -print | xargs rm -f set -e; \ cd $(TOPDIR)/.. ; \ ln -sf $(TOPDIR) $(KERNELPATH) ; \ tar -cvz $(RCS_TAR_IGNORE) -f $(KERNELPATH).tar.gz $(KERNELPATH)/. ; \ rm $(KERNELPATH) ; \ cd $(TOPDIR) ; \ . scripts/mkversion > .version ; \ rpm -ta $(TOPDIR)/../$(KERNELPATH).tar.gz ; \ rm $(TOPDIR)/../$(KERNELPATH).tar.gz

else # ifdef include-config

ifeq ($(filter-out $(noconfig_targets),$(MAKECMDGOALS)),)

  1. Targets which don't need .config
  2. ===========================================================================
  3. These targets basically have their own Makefile - not quite, but at
  4. least its own exclusive section in the same Makefile. The reason for
  5. this is the following:
  6. To know the configuration, the main Makefile has to include
  7. .config. That's a obviously a problem when .config doesn't exist
  8. yet, but that could be kludged around with only including it if it
  9. exists.
  10. However, the larger problem is: If you run make *config, make will
  11. include the old .config, then execute your *config. It will then
  12. notice that a piece it included (.config) did change and restart from
  13. scratch. Which will cause execution of *config again. You get the
  14. picture.
  15. If we don't explicitly let the Makefile know that .config is changed
  16. by *config (the old way), it won't reread .config after *config,
  17. thus working with possibly stale values - we don't that either.
  18. So we divide things: This part here is for making *config targets,
  19. and other targets which should work when no .config exists yet.
  20. The main part above takes care of the rest after a .config exists.
  1. Kernel configuration
  2. ---------------------------------------------------------------------------

.PHONY: oldconfig xconfig menuconfig config \ make_with_config

xconfig: +@$(call descend,scripts,scripts/kconfig.tk) wish -f scripts/kconfig.tk

menuconfig: +@$(call descend,scripts,lxdialog) $(CONFIG_SHELL) $(src)/scripts/Menuconfig arch/$(ARCH)/config.in

config: $(CONFIG_SHELL) $(src)/scripts/Configure arch/$(ARCH)/config.in

oldconfig: $(CONFIG_SHELL) $(src)/scripts/Configure -d arch/$(ARCH)/config.in

randconfig: $(CONFIG_SHELL) $(src)/scripts/Configure -r arch/$(ARCH)/config.in

allyesconfig: $(CONFIG_SHELL) $(src)/scripts/Configure -y arch/$(ARCH)/config.in

allnoconfig: $(CONFIG_SHELL) $(src)/scripts/Configure -n arch/$(ARCH)/config.in

allmodconfig: $(CONFIG_SHELL) $(src)/scripts/Configure -m arch/$(ARCH)/config.in

defconfig: yes | $(CONFIG_SHELL) $(src)/scripts/Configure -d arch/$(ARCH)/config.in

  1. Cleaning is done on three levels.
  2. make clean Delete all automatically generated files, including
  3. tools and firmware.
  4. make mrproper Delete the current configuration, and related files
  5. Any core files spread around is deleted as well
  6. make distclean Remove editor backup files, patch leftover files and the like
  1. Files removed with 'make clean'

CLEAN_FILES += vmlinux System.map MC*

  1. Files removed with 'make mrproper'

MRPROPER_FILES += \ include/linux/autoconf.h include/linux/version.h \ .version .config .config.old config.in config.old \ .menuconfig.log \ include/asm \ .hdepend include/linux/modversions.h \ tags TAGS kernel.spec \ .tmp*

  1. Directories removed with 'make mrproper'

MRPROPER_DIRS += \ .tmp_export-objs \ include/config \ include/linux/modules

  1. clean - Delete all intermediate files

clean-dirs += $(ALL_SUBDIRS) Documentation/DocBook scripts

$(addprefix _clean_,$(clean-dirs)): $(MAKE) MAKEFILES= -rR -f scripts/Makefile.clean obj=$(patsubst _clean_%,%,$@)

quiet_cmd_rmclean = RM $$(CLEAN_FILES) cmd_rmclean = rm -f $(CLEAN_FILES) clean: archclean $(addprefix _clean_,$(clean-dirs)) $(call cmd,rmclean) @find . $(RCS_FIND_IGNORE) \ \( -name '*.[oas]' -o -name '.*.cmd' -o -name '.*.d' \ -o -name '.*.tmp' \) -type f -print | xargs rm -f

  1. mrproper - delete configuration + modules + core files

quiet_cmd_mrproper = RM $$(MRPROPER_DIRS) + $$(MRPROPER_FILES) cmd_mrproper = rm -rf $(MRPROPER_DIRS) && rm -f $(MRPROPER_FILES) mrproper distclean: clean archmrproper @echo ' Making $@ in the srctree' @find . $(RCS_FIND_IGNORE) \ \( -name '*.orig' -o -name '*.rej' -o -name '*~' \ -o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \ -o -name '.*.rej' -o -size 0 \ -o -name '*%' -o -name '.*.cmd' -o -name 'core' \) \ -type f -print | xargs rm -f $(call cmd,mrproper)

  1. Generate tags for editors
  2. ---------------------------------------------------------------------------

define all-sources ( find . $(RCS_FIND_IGNORE) \ \( -name include -o -name arch \) -prune -o \ -name '*.[chS]' -print; \ find arch/$(ARCH) $(RCS_FIND_IGNORE) \ -name '*.[chS]' -print; \ find include $(RCS_FIND_IGNORE) \ \( -name config -o -name 'asm-*' \) -prune \ -o -name '*.[chS]' -print; \ find include/asm-$(ARCH) $(RCS_FIND_IGNORE) \ -name '*.[chS]' -print; \ find include/asm-generic $(RCS_FIND_IGNORE) \ -name '*.[chS]' -print ) endef

quiet_cmd_TAGS = MAKE $@ cmd_TAGS = $(all-sources) | etags -

  1. Exuberant ctags works better with -I

quiet_cmd_tags = MAKE $@ define cmd_tags rm -f $@; \ CTAGSF=`ctags --version | grep -i exuberant >/dev/null && echo "-I __initdata,__exitdata,EXPORT_SYMBOL,EXPORT_SYMBOL_NOVERS"`; \ $(all-sources) | xargs ctags $$CTAGSF -a endef

TAGS: FORCE $(call cmd,TAGS)

tags: FORCE $(call cmd,tags)

  1. Brief documentation of the typical targets used
  2. ---------------------------------------------------------------------------

help: @echo 'Cleaning targets:' @echo ' clean - remove most generated files but keep the config' @echo ' mrproper - remove all generated files including the config' @echo ' distclean - mrproper + remove files generated by editors and patch' @echo @echo 'Configuration targets:' @echo ' oldconfig - Update current config utilising a line-oriented program' @echo ' menuconfig - Update current config utilising a menu based program' @echo ' xconfig - Update current config utilising a X-based program' @echo ' defconfig - New config with default answer to all options' @echo ' allmodconfig - New config selecting modules when possible' @echo ' allyesconfig - New config where all options are accepted with yes' @echo ' allnoconfig - New minimal config' @echo @echo 'Other generic targets:' @echo ' all - Build all targets marked with [*]' @echo ' dep - Create module version information' @echo '* vmlinux - Build the bare kernel' @echo '* modules - Build all modules' @echo ' dir/file.[ois]- Build specified target only' @echo ' rpm - Build a kernel as an RPM package' @echo ' tags/TAGS - Generate tags file for editors' @echo @echo 'Documentation targets:' @$(MAKE) --no-print-directory -f Documentation/DocBook/Makefile dochelp @echo @echo 'Architecture specific targets ($(ARCH)):' @$(MAKE) --no-print-directory -f arch/$(ARCH)/boot/Makefile archhelp @echo @echo 'Execute "make" or "make all" to build all targets marked with [*] ' @echo 'For further info browse Documentation/kbuild/*'


  1. Documentation targets
  2. ---------------------------------------------------------------------------

sgmldocs psdocs pdfdocs htmldocs: scripts +@$(call descend,Documentation/DocBook,$@)

  1. Scripts to check various things for consistency
  2. ---------------------------------------------------------------------------

checkconfig: find * $(RCS_FIND_IGNORE) \ -name '*.[hcS]' -type f -print | sort \ | xargs $(PERL) -w scripts/checkconfig.pl

checkhelp: find * $(RCS_FIND_IGNORE) \ -name [cC]onfig.in -print | sort \ | xargs $(PERL) -w scripts/checkhelp.pl

checkincludes: find * $(RCS_FIND_IGNORE) \ -name '*.[hcS]' -type f -print | sort \ | xargs $(PERL) -w scripts/checkincludes.pl

else # ifneq ($(filter-out $(noconfig_targets),$(MAKECMDGOALS)),)

  1. We're called with both targets which do and do not need
  2. .config included. Handle them one after the other.
  3. ===========================================================================

%:: FORCE $(MAKE) $@

endif # ifeq ($(filter-out $(noconfig_targets),$(MAKECMDGOALS)),) endif # ifdef include-config

  1. FIXME Should go into a make.lib or something
  2. ===========================================================================

echo_target = $@

a_flags = -Wp,-MD,$(depfile) $(AFLAGS) $(NOSTDINC_FLAGS) \ $(modkern_aflags) $(EXTRA_AFLAGS) $(AFLAGS_$(*F).o)

quiet_cmd_as_s_S = CPP $(echo_target) cmd_as_s_S = $(CPP) $(a_flags) -o $@ $<

  1. read all saved command lines

targets := $(wildcard $(sort $(targets))) cmd_files := $(wildcard .*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))

ifneq ($(cmd_files),)

 include $(cmd_files)

endif

  1. execute the command and also postprocess generated .d dependencies
  2. file

if_changed_dep = $(if $(strip $? $(filter-out FORCE $(wildcard $^),$^)\ $(filter-out $(cmd_$(1)),$(cmd_$@))\ $(filter-out $(cmd_$@),$(cmd_$(1)))),\ @set -e; \ $(if $($(quiet)cmd_$(1)),echo ' $($(quiet)cmd_$(1))';) \ $(cmd_$(1)); \ scripts/fixdep $(depfile) $@ '$(cmd_$(1))' > $(@D)/.$(@F).tmp; \ rm -f $(depfile); \ mv -f $(@D)/.$(@F).tmp $(@D)/.$(@F).cmd)

  1. Usage: $(call if_changed_rule,foo)
  2. will check if $(cmd_foo) changed, or any of the prequisites changed,
  3. and if so will execute $(rule_foo)

if_changed_rule = $(if $(strip $? \ $(filter-out $(cmd_$(1)),$(cmd_$(@F)))\ $(filter-out $(cmd_$(@F)),$(cmd_$(1)))),\ @$(rule_$(1)))

  1. If quiet is set, only print short version of command

cmd = @$(if $($(quiet)cmd_$(1)),echo ' $($(quiet)cmd_$(1))' &&) $(cmd_$(1))

define update-if-changed if [ -r $@ ] && cmp -s $@ $@.tmp; then \ echo ' (unchanged)'; \ rm -f $@.tmp; \ else \ echo ' (updated)'; \ mv -f $@.tmp $@; \ fi endef

  1. $(call descend,<dir>,<target>)
  2. Recursively call a sub-make in <dir> with target <target>

ifeq ($(KBUILD_VERBOSE),1) descend = echo '$(MAKE) -f $(1)/Makefile $(2)'; endif descend += $(MAKE) -f $(1)/Makefile obj=$(1) $(2)

FORCE: